The Case IH Farmall 110M tractor primary air filter part number is 381423R92. The inner safety filter is 381423R92.
Case IH Farmall 110M Air Filter Details
Primary air filter part number
381423R92
Inner safety air filter part number
381423R92
Outer air filter part number
Same as primary air filter
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
400 hrs
Light use
800 hrs
These are practical inspection/replacement guide ranges for the row-crop tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Case IH Farmall 110M Extra Air Filter Notes
Engine model
S8000
Engine horsepower
110 hp | 82 kW
Primary filter note
For the Case IH Farmall 110M, the listed primary air filter part number is 381423R92. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The outer air filter for the Case IH Farmall 110M appears to be the same listed item as the primary filter.
Safety filter note
The listed inner safety air filter is 381423R92. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Case IH Farmall 110M Air Filter FAQs
What would make a Case IH Farmall 110M air filter cross-listing suspicious?
Because this listing shows a primary/outer service element plus an inner safety element, the risk is ordering one correct number and one wrong companion element. Keep 381423R92 as the main reference, then confirm the other elements separately.
Which Case IH Farmall 110M air-filter parts should be changed together?
For normal service, the primary/outer element is the one that does the dirty work. The inner safety element is backup protection, so replace it less often and keep it seated while cleaning the housing.
Can the Case IH Farmall 110M lose power from a dirty air filter?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Is the Case IH Farmall 110M outer filter the same as the primary filter?
Do not read the primary and outer rows as two separate filters here. They point to the same service element, with the safety element handled separately.
How should I read the Case IH Farmall 110M air-filter number?
Use the full 381423R92 string. Do not trim suffixes or ignore letters; small part-number changes can mean a different seal or element length.
Why should I check the engine before ordering a Case IH Farmall 110M air filter?
Treat engine data as a second check. The primary filter number and old element should carry more weight.
When should the Case IH Farmall 110M safety element be replaced?
Replace the safety element when it is contaminated, damaged, wet or due by the book. Blowing it out as a normal habit is a dumb way to push dirt toward the engine.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official caseih.com website before ordering or installing an air filter.
