Case IH Farmall 25A Specifications

The Case IH Farmall 25A specifications include engine power rated at 24.6 hp (18.3 kW), transmission options including sync shuttle or hydrostatic and a listed weight of 2,469 lbs (1,119 kg).

Case IH Farmall 25A key specifications

Engine power 24.6 hp (18.3 kW)
PTO power 19.2 hp (14.3 kW)
Displacement 80.4 cu in (1.3 L)
Transmission sync shuttle or hydrostatic
Fuel capacity 7.4 gal (28.0 L)
Weight 2,469 lbs (1,119 kg)
Wheelbase 65.9 inches (167 cm)

Case IH Farmall 25A industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power24.6 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power19.2 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement1.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity7.4 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight2,469 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase65.9 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average

Case IH Farmall 25A power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power24.6 hp
PTO power19.2 hp

Case IH Farmall 25A dimensions chart

Compare the main listed tractor dimensions using centimetres.

Length297 cm
Wheelbase167 cm
ROPS height224 cm

Engine specifications

Bore/Stroke 3.07 × 3.62 inches (78 × 92 mm)
Rated RPM 2,500
Starter electric
Starter volts 12
Emissions Tier IV

Transmission options

Gear options 12 forward and reverse or infinite forward and reverse (3-range)
Clutch dry disc

PTO and hitch

Rear hitch category Category I
Rear lift (at 24"/610mm) 1,433 lbs (650 kg)
Rear PTO independent
Rear PTO speed 540 rpm, 1.375-inch shaft
PTO engine speed 2,000

Hydraulics

Hydraulic type open center
Rear valves 1 (optional)
Pump flow 7.9 gpm (29.9 L/min)

Mechanical specifications

Differential lock mechanical rear

Electrical specifications

Electrical ground negative
Charging system alternator
Battery volts 12

Dimensions and weight

Length 117.2 inches (297 cm)
ROPS height 88.2 inches (224 cm)
Folded ROPS height 68.2 inches (173 cm)

Attachments

Backhoe type CaseIH BH80 Backhoe

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.