The Case IH Farmall 105V tractor weighs 5,979 lb (2,712 kg) using its published Weight ROPS weight. Other useful published figures are 6,151 lb (Weight — Cab). That places it around the 26th percentile among tractors in the dataset, on the lighter side of its peer group.
The published Case IH Farmall 105V weight is 5,979–6,151 lb (2,712–2,790 kg). The primary figure used for comparisons is 5,979 lb (2,712 kg), listed as Weight — ROPS. The published configurations span 172 lb, a 2.9% difference from the lightest listed setup.
Tractor-weight benchmark
How this weight compares
All tractors in this dataset · 2,282 tractors in the benchmark.
Representative published weight
Average
5,979 lb
Low1,984 lb
This model5,979 lb
Average9,927 lb
High21,767 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight5,979–6,151 lb (2,712–2,790 kg)
Overall weight bandMidweight
Tractor typeFarm tractor
Primary horsepower106 hp / 79 kW
Max width42.5 in (107 cm)
Max height88.6 in (225 cm)
Overview
Model information
Manufacturer
Case IH
Model
Farmall 105V
Category
Farm tractor
Model years
2014 – 2016
Tractor type
Farm tractor
Published weight variants
2
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
ROPS
5,979 lb
2,712 kg
2.99
—
Weight
Cab
6,151 lb
2,790 kg
3.08
—
Configuration effect
How configuration changes the weight
172 lbLightest to heaviest · 2.9% spread across published variants
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase85.8 in (217 cm)
Width42.5 in (107 cm)
Height88.6 in (225 cm)
Power & weight ratios
Primary power106 hp (79 kW)
Power basisEngine (gross)
Weight per horsepower56.4 lb/hp
Transport snapshot
Primary published weight5,979 lb (2,712 kg)
Maximum published weight6,151 lb (2,790 kg)
Maximum US-ton equivalent3.08 US tons
Maximum published width42.5 in (107 cm)
Published width over 102 inNo
Weight context
Weight range5,979–6,151 lb (2,712–2,790 kg)
Primary weight basisWeight — ROPS
Peer positionAverage among All tractors in this dataset · 47th percentile
Physical size classNot enough dimension data
For transport planning, the representative published tractor weight is about 5,979 lb (2.99 US tons); published configurations reach 6,151 lb (3.08 US tons); the widest published tractor dimension is 42.5 in (3.5 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
John Deere 2130 (5980 lb)
Kubota M7500 (5980 lb)
Case IH CS 48 (5976 lb)
New Holland TN70A (5975 lb)
Ford 5030 (5988 lb)
Closest comparable tractors
John Deere 2130 (5980 lb)
Kubota M7500 (5980 lb)
John Deere 2355 (5965 lb)
John Deere 1040 (6107 lb)
Farmall 460 (5835 lb)
Common questions
Case IH Farmall 105V weight FAQ
How much does a Case IH Farmall 105V weigh?
The Case IH Farmall 105V weighs 5,979 lb (2,712 kg) using the published Weight — ROPS figure. Across the published configurations on this page, weight ranges from 5,979 to 6,151 lb (2,712 to 2,790 kg).
Is the Case IH Farmall 105V heavy or light for a farm tractor?
It is close to average for its peer group. The representative figure sits at about the 47th percentile, near the middle of the all tractors in this dataset. That puts it in the average range for this comparison. It is 3,948 lb lighter than the peer-group average of 9,927 lb.
How wide is the Case IH Farmall 105V for transport?
The maximum published tractor width is 42.5 in (3.5 ft). That is 59.5 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Case IH Farmall 105V weight-to-horsepower ratio?
Using the page’s representative 5,979 lb weight and 106 hp power figure, the tractor carries about 56.4 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Case IH Farmall 105V weigh?
The representative published weight is about 2.99 US tons, while the full published range is 2.99–3.08 US tons. Loaded transport weight can be higher than the tractor specification.
