Quick answer:
The Case IH Farmall 105V tractor battery spec found is 12 V, Group 31, with 800 CCA.
Voltage12 V
Group size31
Cold cranking amps800 CCA
Case IH Farmall 105V Battery Size Details
| Replacement battery recommendation | 12 V, Group 31, 800 CCA |
|---|---|
| Battery voltage | 12 V |
| Battery group size | 31 |
| Battery CCA | 800 CCA |
Battery CCA Comparison Chart
Battery CCA comparison
Benchmarks use practical low, average and high cold-cranking-amp ranges for the utility tractor category. Use the exact battery label and manual before buying.
Case IH Farmall 105V Extra Battery Notes
| Replacement note | For the Case IH Farmall 105V, match the replacement battery to the captured spec: 12 V, Group 31, 800 CCA. Physical fit, terminal layout and hold-down fit still matter |
|---|---|
| Battery location | The battery on the Case IH Farmall 105V tractor is located under the hood, typically near the engine compartment |
| Bad battery symptoms | Common symptoms of a failing battery in a Case IH Farmall 105V tractor include hard starting or no response when trying to start, clicking sounds, and rapid battery drain. Additionally, corrosion on battery terminals can prevent proper electrical flow, indicating the need for service or replacement |
| Safe removal note | Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame |
Official information note
Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official caseih.com website before ordering a replacement battery.







