The Case IH CVX 130 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 30.6 gpm | 115.8 lpm.
Case IH CVX 130 Hydraulic Capacity & Flow Specs
| Total hydraulic flow | 30.6 gpm | 115.8 lpm |
|---|
Case IH CVX 130 Hitch, Remote & Lift Specs
| Rear lift | 21983.85 lbs | 9971 kg |
|---|
Case IH CVX 130 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH CVX 130 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | Disc brakes |
Case IH CVX 130 Hydraulic Capacity FAQ
Why is the Case IH CVX 130 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH CVX 130, but total hydraulic flow is 30.6 gpm | 115.8 lpm and lift is listed as 21983.85 lbs | 9971 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH CVX 130 hydraulics feel fast or slow?
The useful speed clue is 30.6 gpm | 115.8 lpm total hydraulic flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH CVX 130?
On the Case IH CVX 130, 30.6 gpm | 115.8 lpm total hydraulic flow points to slower loader and cylinder movement and 21,983.8 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH CVX 130?
For implement matching, the useful checks are 30.6 gpm flow and 21,983.8 lb listed lift. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH CVX 130 rear lift capacity strong?
The listed lift figure is 21983.85 lbs | 9971 kg, above the 15,500 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Will the Case IH CVX 130 hydraulics handle long hydraulic jobs?
The useful heat clues are 30.6 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What should you check before servicing the Case IH CVX 130 hydraulics?
For service planning, flow is listed at 30.6 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
