The Case IH CS 58 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 10 gpm | 37.9 lpm.
Case IH CS 58 Hydraulic Capacity & Flow Specs
| Total hydraulic flow | 10 gpm | 37.9 lpm |
|---|
Case IH CS 58 Hitch, Remote & Lift Specs
| Rear lift | 5049.45 lbs | 2290 kg |
|---|
Case IH CS 58 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH CS 58 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Disc brakes |
Case IH CS 58 Hydraulic Capacity FAQ
Why is the Case IH CS 58 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH CS 58, but total hydraulic flow is 10 gpm | 37.9 lpm and lift is listed as 5049.45 lbs | 2290 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH CS 58 hydraulics feel fast or slow?
The useful speed clue is 10 gpm | 37.9 lpm total hydraulic flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH CS 58?
On the Case IH CS 58, 10 gpm | 37.9 lpm total hydraulic flow points to slower loader and cylinder movement and 5,049.4 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH CS 58?
For implement matching, the useful checks are 10 gpm flow and 5,049.4 lb listed lift. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH CS 58 rear lift capacity strong?
The listed lift figure is 5049.45 lbs | 2290 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the Case IH CS 58 hydraulics handle long hydraulic jobs?
The useful heat clues are 10 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What should you check before servicing the Case IH CS 58 hydraulics?
For service planning, flow is listed at 10 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
