The Case IH C60 tractor battery spec found is 12 V with 810 CCA.
Voltage12 V
Cold cranking amps810 CCA
Case IH C60 Battery Size Details
Replacement battery recommendation
12 V, 810 CCA
Battery voltage
12 V
Battery CCA
810 CCA
Battery CCA Comparison Chart
Battery CCA comparison
This model
810 CCA
Average
850 CCA
Low
650 CCA
High
1,100 CCA
Benchmarks use practical low, average and high cold-cranking-amp ranges for the utility tractor category. Use the exact battery label and manual before buying.
Case IH C60 Extra Battery Notes
Replacement note
For the Case IH C60, match the replacement battery to the captured spec: 12 V, 810 CCA. Physical fit, terminal layout and hold-down fit still matter
Battery location
The battery on the Case IH C60 is located beneath the foot plate on the tractor, attached to the plate by bolts and a metal lip
Battery replacement steps
To replace the battery on a Case IH C60 tractor, first disconnect the negative (black) terminal followed by the positive (red) terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal
Bad battery symptoms
Case IH C60 tractor battery issues often show as hard starting or no response when turning the key, rapid battery drain or inability to hold a charge, and corrosion on battery terminals or connections
Safe removal note
Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame
Official information note
Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official caseih.com website before ordering a replacement battery.
