The Case IH 995 dimensions found are: length is 142 inches | 360 cm, minimum tread width is 78 inches | 198 cm, height is 97.4 inches | 247 cm, and wheelbase is 88.7 inches | 225 cm.
Length142 inches | 360 cm
Width78 inches | 198 cm
Height97.4 inches | 247 cm
Wheelbase88.7 inches | 225 cm
Case IH 995 Dimensions
Overall length
142 inches | 360 cm
Overall width
Minimum tread width: 78 inches | 198 cm | 78 inches | at minimum tread. 198 cm
Overall height
ROPS: 97.4 inches | 247 cm
Wheelbase
88.7 inches | 225 cm
Ground clearance
2WD front axle: 22 inches | 55 cm | 4WD front axle: 15.5 inches | 39 cm
Case IH 995 Weight
Shipping weight
6065 lbs | 2751 kg | 7223 lbs | 3276 kg
Case IH 995 Tire Size Notes
Ag front
7.50-16
Ag rear
14.9R24
Case IH 995 Dimension Comparison Charts
Length comparison
This model
142 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
78 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
97.4 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
88.7 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
22 in
Average
15 in
Low
10 in
High
21 in
Weight comparison
This model
6,065 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
77 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 995 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 995 is about 142 inches | 360 cm long, about 78 inches | 198 cm wide, and about 97.4 inches | 247 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 995 Dimensions FAQ
Is the Case IH 995 a long tractor?
The Case IH 995 has an average listed length at 142 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH 995 narrow enough for tight storage?
The listed width is middle-of-the-pack at 78 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH 995 tall for a shed or garage?
The listed height is about normal at 97.4 in, which is close to the 100 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH 995 need?
The bare footprint is about 77 sq ft from a 11.8 ft length and 6.5 ft width. That is close to the 75 sq ft benchmark for this category.
Does the Case IH 995 have a short or long wheelbase?
The wheelbase is average for the category at 88.7 in, which is close to the 86 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 995 have good ground clearance?
The listed ground clearance is high for the category at 22 in, which is above the 15 in benchmark average. It has more underside clearance than the benchmark average.
Is the Case IH 995 heavy for its size?
The listed weight is average for the category at 6,065 lbs, which is close to the 5,500 lbs benchmark average. It sits near the normal benchmark before ballast, loader weight or implements are added.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
