The Case IH 9240 specifications include engine power rated at 235 hp (175.2 kW), a full power shift transmission and a listed weight of 28,214 lbs (12,797 kg).
Case IH 9240 key specifications
| Engine power |
235 hp (175.2 kW) |
| PTO power |
207 hp (154.4 kW) |
| Displacement |
504.5 cu in (8.3 L) |
| Transmission |
full power shift |
| Fuel capacity |
200 gal (757.0 L) |
| Weight |
28,214 lbs (12,797 kg) |
| Wheelbase |
124 inches (314 cm) |
Case IH 9240 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power235 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power207 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity200 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight28,214 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase124 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 9240 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power175.9 hp
Case IH 9240 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity757 L
Case IH 9240 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.488 × 5.315 inches (114 × 135 mm) |
| Rated RPM |
2,200 |
| Torque |
701 lb-ft (950.6 Nm) |
| Torque RPM |
1,500 |
| Compression |
16.5:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
22 qt (20.8 L) |
| Coolant capacity |
29.6 qt (28.0 L) |
| Starter volts |
12 |
Transmission options
| Gears |
12 forward and 3 reverse |
| Clutch |
hydraulic wet disc |
PTO and hitch
| Drawbar (tested) |
175.89 hp (131.2 kW) |
| PTO (tested) |
215.87 hp (161.0 kW) |
| Rear hitch category |
Category III (optional) |
| Hitch control |
draft control (optional) |
| Rear lift |
12,750 lbs (5,783 kg) |
| Rear PTO |
independent (optional) |
| Rear PTO speed |
1,000 rpm |
| PTO engine speed |
1,000 PTO rpm at 2,098 engine rpm |
Hydraulics
| Hydraulic capacity |
18 gal (68.1 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,500 psi (172.4 bar) |
| Valves |
4 |
| Total flow |
28 gpm (106.0 L/min) |
Mechanical specifications
| Drive |
4×4 4WD |
| Steering |
four-wheel hydrostatic power |
Electrical specifications
| Electrical ground |
negative |
| Battery volts |
12 |
Dimensions and weight
| Length |
250.3 inches (635 cm) |
| Width |
93.5 inches (237 cm, minimum) |
| Operating weight |
28,214 lbs (12,797 kg, 20.8R38 duals) |
| Exhaust height |
143.0 inches (363 cm) |
Tires and tread
| Front tire |
18.4-38 |
| Rear tire |
18.4-38 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
