The Case IH 7220 specifications include PTO power rated at 155 hp (115.6 kW), transmission options including full power shift or creeper and a listed weight of 15,630 to 17,418 lbs.
Case IH 7220 key specifications
| PTO power | 155 hp (115.6 kW) |
|---|---|
| Displacement | 504.5 cu in (8.3 L) |
| Transmission | full power shift or creeper |
| Fuel capacity | 78 gal (295.2 L) |
| Weight | 15,630 to 17,418 lbs |
| Wheelbase | 118.3 inches (300 cm) |
| Rear PTO | independent |
Case IH 7220 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
PTO power155 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity78 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight17,418 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase118.3 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 7220 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH 7220 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Engine specifications
| Bore/Stroke | 4.488 × 5.315 inches (114 × 135 mm) |
|---|---|
| Rated RPM | 2,200 |
| Compression | 16.5:1 |
| Fuel system | mechanical injection |
| Air cleaner | dual paper elements |
| Pre-heating | block heater (optional) |
| Oil capacity | 22 qt (20.8 L) |
| Coolant capacity | 28 qt (26.5 L) |
| Starter volts | 12 |
Transmission options
| Gear options | 18 forward and 4 reverse or 24 forward and 6 reverse |
|---|
PTO and hitch
| Drawbar (tested) | 132.79 hp (99.0 kW) |
|---|---|
| PTO (tested) | 168.56 hp (125.7 kW) |
| Rear hitch category | Category III/IIIN |
| Hitch control | electronic lower-link draft sensing |
| Rear lift | 8,300 lbs (3,764 kg) |
| Rear PTO speed | 540 or 1,000 rpm, dual 1.375-inch shafts |
Hydraulics
| Hydraulic capacity | 45.5 gal (172.2 L) |
|---|---|
| Hydraulic type | closed center pressure flow compensated (PFC) |
| Hydraulic pressure | 2,300 psi (158.6 bar) |
| Valves | 2 to 4 |
| SCV flow | 22 gpm (83.3 L/min) |
| Total flow | 29 gpm (109.8 L/min) |
Mechanical specifications
| Clutch | electro-hydraulic wet disc |
|---|---|
| Differential lock | electric rear |
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| Charging amps | 110 |
| Charging volts | 12 |
| Batteries | 2 |
| Battery CCA | 950 |
| Battery volts | 12 |
Dimensions and weight
| Operating weight | 17,418 lbs (7,900 kg) |
|---|---|
| 2WD front axle clearance | 22.4 inches (56 cm) |
| 4WD front axle clearance | 16.6 inches (42 cm) |
| Rear axle | 4.0 × 96 inches (101 × 2,438 mm), 4.0 × 112 inches (101 × 2,844 mm), or 4.0 × 118 inches (101 × 2,997 mm) |
Tires and tread
| Front tire | 11.00-16 |
|---|---|
| Rear tire | 18.4R38 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
