The Case IH 5250 Maxxum tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 20 gpm | 75.7 lpm, hydraulic pressure is 2600 psi | 179.3 bar, and hydraulic type is closed center pressure-flow compensated.
Case IH 5250 Maxxum Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center pressure-flow compensated |
|---|---|
| Hydraulic pressure | 2600 psi | 179.3 bar |
| Pump flow | 20 gpm | 75.7 lpm |
| Hydraulic valves | 1 to 3 |
Case IH 5250 Maxxum Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear hitch control | lower-link draft sensing |
| Rear lift | 7700 lbs | 3492 kg |
| Rear lift at 24 inches | 6990 lbs | 3170 kg |
Case IH 5250 Maxxum Useful Hydraulic Calculations
| Rear lift per pump gpm | 349.5 lb per gpm |
|---|---|
| Estimated hydraulic horsepower | about 30.3 hydraulic hp from listed pressure and pump flow |
Case IH 5250 Maxxum Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH 5250 Maxxum Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Differential lock | electro-hydraulic rear |
Case IH 5250 Maxxum Hydraulic Capacity FAQ
Why is the Case IH 5250 Maxxum hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH 5250 Maxxum, but pump flow is 20 gpm | 75.7 lpm, pressure is 2600 psi | 179.3 bar, system type is closed center pressure-flow compensated, and lift is listed as 6990 lbs | 3170 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH 5250 Maxxum hydraulics feel fast or slow?
The useful speed clue is 20 gpm | 75.7 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Case IH 5250 Maxxum hydraulic pressure tell you?
The pressure spec is 2600 psi | 179.3 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH 5250 Maxxum?
On the Case IH 5250 Maxxum, 20 gpm | 75.7 lpm pump flow points to quicker loader and cylinder movement, 2,600 psi pressure affects force more than speed, and 6,990 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH 5250 Maxxum?
For implement matching, the useful checks are 20 gpm flow, 2,600 psi pressure, 6,990 lb listed lift, and 1 to 3 remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH 5250 Maxxum rear lift capacity strong?
The listed lift figure is 6990 lbs | 3170 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Case IH 5250 Maxxum hydraulic remotes enough?
The Case IH 5250 Maxxum remote/valve listing is 1 to 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH 5250 Maxxum hydraulics handle long hydraulic jobs?
The useful heat clues are 20 gpm flow, 2,600 psi pressure, and about 30.3 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Case IH 5250 Maxxum make on paper?
Using 2,600 psi and 20 gpm, the rough pressure-flow estimate is about 30.3 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Case IH 5250 Maxxum hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is lower-link draft sensing, and listed lift is 6990 lbs | 3170 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
