The Case IH 5150 Maxxum tractor hydraulic capacity is 20.1 gal | 76.1 L, pump flow is 20.7 gpm | 78.3 lpm, and hydraulic pressure is 2756 psi | 190.0 bar.
Hydraulic Capacity20.1 gal | 76.1 L
Hydraulic Flow20.7 gpm | 78.3 lpm
Pressure2756 psi | 190.0 bar
Case IH 5150 Maxxum Hydraulic Capacity & Flow Specs
Hydraulic capacity
20.1 gal | 76.1 L
Hydraulic pressure
2756 psi | 190.0 bar
Pump flow
20.7 gpm | 78.3 lpm
Case IH 5150 Maxxum Hitch, Remote & Lift Specs
Rear hitch type
II
Case IH 5150 Maxxum Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
1 gpm per gal
Hydraulic tank turnover estimate
about 1 minutes at rated pump flow
Estimated hydraulic horsepower
about 33.3 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
76.1 L capacity with 20.7 gpm pump flow
Case IH 5150 Maxxum Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
20.1 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
20.7 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,756 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH 5150 Maxxum Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Wet disc brakes
Case IH 5150 Maxxum Hydraulic Capacity FAQ
Is the Case IH 5150 Maxxum hydraulic capacity big or small for its size?
The Case IH 5150 Maxxum lists 20.1 gal | 76.1 L of hydraulic capacity, which is close to the 18 gal benchmark for this group. It is a normal-sized hydraulic oil volume for this tractor class, so the bigger performance clues are flow, pressure and lift.
Will the Case IH 5150 Maxxum hydraulics feel fast or slow?
The useful speed clue is 20.7 gpm | 78.3 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Case IH 5150 Maxxum hydraulic pressure tell you?
The pressure spec is 2756 psi | 190.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH 5150 Maxxum?
On the Case IH 5150 Maxxum, 20.7 gpm | 78.3 lpm pump flow points to quicker loader and cylinder movement and 2,756 psi pressure affects force more than speed. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH 5150 Maxxum?
For implement matching, the useful checks are 20.7 gpm flow, 2,756 psi pressure, and II hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Will the Case IH 5150 Maxxum hydraulics handle long hydraulic jobs?
The useful heat clues are 20.1 gal of hydraulic capacity, 20.7 gpm flow, 2,756 psi pressure, and about 33.3 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Case IH 5150 Maxxum make on paper?
Using 2,756 psi and 20.7 gpm, the rough pressure-flow estimate is about 33.3 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Case IH 5150 Maxxum hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the Case IH 5150 Maxxum hydraulics?
For service planning, the oil-volume figure is 20.1 gal | 76.1 L, pressure is listed at 2,756 psi, and flow is listed at 20.7 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
