The Case IH 3594 dimensions found are: length is 192.5 inches | 488 cm, width is 60 inches | 152 cm, height is 120 inches | 304 cm, and wheelbase is 116 inches | 294 cm.
Length192.5 inches | 488 cm
Width60 inches | 152 cm
Height120 inches | 304 cm
Wheelbase116 inches | 294 cm
Case IH 3594 Dimensions
Overall length
192.5 inches | 488 cm
Overall width
60 inches | 152 cm
Overall height
Cab: 120 inches | 304 cm
Wheelbase
116 inches | 294 cm
Ground clearance
Frame: 18 inches | 45 cm
Case IH 3594 Weight
Operating weight
17590 lbs | 7978 kg
Ballasted weight
20500 lbs | 9298 kg
Case IH 3594 Tire Size Notes
Ag front
16.9-26
Ag rear
24.5R-32
Case IH 3594 Dimension Comparison Charts
Length comparison
This model
192.5 in
Average
190 in
Low
155 in
High
240 in
Width comparison
This model
60 in
Average
96 in
Low
78 in
High
120 in
Height comparison
This model
120 in
Average
125 in
Low
105 in
High
150 in
Wheelbase comparison
This model
116 in
Average
115 in
Low
95 in
High
145 in
Ground clearance comparison
This model
18 in
Average
18 in
Low
12 in
High
26 in
Weight comparison
This model
17,590 lbs
Average
13,000 lbs
Low
8,000 lbs
High
22,000 lbs
Floor space footprint
This model
80 sq ft
Average
130 sq ft
Low
90 sq ft
High
200 sq ft
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 3594 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 3594 is about 192.5 inches | 488 cm long, about 60 inches | 152 cm wide, and about 120 inches | 304 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 3594 Dimensions FAQ
Is the Case IH 3594 a long tractor?
The Case IH 3594 has an average listed length at 192.5 in, which is close to the 190 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH 3594 narrow enough for tight storage?
Yes, based on width alone it is relatively narrow at 60 in, which is below the 96 in benchmark average. That is the better result for tight gates, sheds and trailer decks.
Is the Case IH 3594 tall for a shed or garage?
The listed height is about normal at 120 in, which is close to the 125 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH 3594 need?
The bare footprint is about 80 sq ft from a 16 ft length and 5 ft width. That is below the 130 sq ft benchmark for this category.
Does the Case IH 3594 have a short or long wheelbase?
The wheelbase is average for the category at 116 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 3594 have good ground clearance?
The listed ground clearance is average at 18 in, which is close to the 18 in benchmark average. It is neither especially low nor especially high for this category.
Is the Case IH 3594 heavy for its size?
The listed weight is heavy for the category at 17,590 lbs, which is above the 13,000 lbs benchmark average. Plan trailer, shed floor and transport decisions around the real operating setup, not just the bare spec.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
