The Case IH 3294 specifications include engine power rated at 197 hp (146.9 kW), a three-speed power shift transmission and a listed weight of 17,000 lbs (7,711 kg).
Case IH 3294 key specifications
| Engine power |
197 hp (146.9 kW) |
| PTO power |
162 hp (120.8 kW) |
| Displacement |
504 cu in (8.3 L) |
| Transmission |
three-speed power shift |
| Fuel capacity |
65 gal (246.0 L) |
| Weight |
17,000 lbs (7,711 kg) |
| Wheelbase |
104 inches (264 cm) |
Case IH 3294 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power197 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power162 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity65 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight17,000 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase104 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 3294 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power140.8 hp
Case IH 3294 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity246 L
Hydraulic capacity121.1 L
Case IH 3294 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Power and performance
| Original price |
$67,600 in 1984 |
Engine specifications
| Bore/Stroke |
4.625 × 5.00 inches (117 × 127 mm) |
| Rated RPM |
2,100 |
| Oil capacity |
30 qt (28.4 L) |
| Coolant capacity |
44 qt (41.6 L) |
| Starter volts |
12 |
Transmission options
| Gears |
12 forward and 3 reverse |
| Oil capacity |
112 qt (106.0 L) |
PTO and hitch
| Drawbar (claimed) |
143 hp (106.6 kW) |
| Drawbar (tested) |
140.79 hp (105.0 kW) |
| PTO (tested) |
162.63 hp (121.3 kW) |
| Rear hitch category |
Category 3/2 |
| Rear lift (at 24"/610mm) |
6,600 lbs (2,993 kg) |
| Rear PTO |
independent |
| Rear PTO speed |
1,000 rpm |
Hydraulics
| Hydraulic capacity |
32 gal (121.1 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,250 psi (155.1 bar) |
| Valves |
2 to 4 |
| Pump flow |
23 gpm (87.1 L/min) |
| Steering flow |
8 gpm (30.3 L/min) |
| Steering pressure |
2,000 psi (137.9 bar) |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
72 |
| Battery volts |
12 |
Dimensions and weight
| Width |
96 inches (243 cm) |
| Maximum permitted weight |
18,000 lbs (8,164 kg) |
| Rear axle bar |
3.5 × 96 inches (88 × 2,438 mm) or 3.5 × 120 inches (88 × 3,048 mm) |
Tires and tread
| Rear tread |
60 to 88 inches (152 to 223 cm) or 60 to 112 inches (152 to 284 cm) |
| Front tire |
11.00-16 or 14L-16 |
| Rear tire |
18.4-38 or 23.1-34 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
