The Case IH 255 dimensions found are: length is 111.8 inches | 283 cm, width is 47 inches | 119 cm, height is 54.9 inches | 139 cm, and wheelbase is 65.9 inches | 167 cm.
Length111.8 inches | 283 cm
Width47 inches | 119 cm
Height54.9 inches | 139 cm
Wheelbase65.9 inches | 167 cm
Case IH 255 Dimensions
Overall length
111.8 inches | 283 cm
Overall width
2WD: 47 inches | 119 cm | 4WD: 46.8 inches | 118 cm
Overall height
Steering wheel: 54.9 inches | 139 cm | ROPS: 82.5 inches | 209 cm
Wheelbase
65.9 inches | 167 cm
Ground clearance
Frame: 14.8 inches (frame) | 37 cm | 2WD front axle: 14.4 inches | 36 cm | 4WD front axle: 11.8 inches | 29 cm
Front tread
2WD: 35.8 to 39.8 inches | 90 to 101 cm | 4WD: 38.2 inches | 97 cm
Benchmarks use practical low, average and high dimension ranges for the compact tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 255 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 255 is about 111.8 inches | 283 cm long, about 47 inches | 119 cm wide, and about 54.9 inches | 139 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 255 Dimensions FAQ
Is the Case IH 255 a long tractor?
The Case IH 255 has an average listed length at 111.8 in, which is close to the 115 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH 255 narrow enough for tight storage?
Yes, based on width alone it is relatively narrow at 47 in, which is below the 56 in benchmark average. That is the better result for tight gates, sheds and trailer decks.
Is the Case IH 255 tall for a shed or garage?
The listed height is low for the category at 54.9 in, which is below the 86 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Case IH 255 need?
The bare footprint is about 36 sq ft from a 9.3 ft length and 3.9 ft width. That is below the 45 sq ft benchmark for this category.
Does the Case IH 255 have a short or long wheelbase?
The wheelbase is average for the category at 65.9 in, which is close to the 68 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 255 have good ground clearance?
The listed ground clearance is high for the category at 14.8 in, which is above the 12 in benchmark average. It has more underside clearance than the benchmark average.
Is the Case IH 255 heavy for its size?
The listed weight is average for the category at 1,940 lbs, which is close to the 2,200 lbs benchmark average. It sits near the normal benchmark before ballast, loader weight or implements are added.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
