The Case IH 1455 XL tractor engine horsepower is 145 hp | 108.1 kW.
Engine HP145 hp | 108.1 kW
Torque390 lb-ft | 528.8 Nm
Displacement402 ci | 6.6 L
Case IH 1455 XL Horsepower Specs
Engine horsepower
145 hp | 108.1 kW
Case IH 1455 XL Useful Horsepower Calculations
Engine size per engine horsepower
2.8 ci per engine hp
Engine horsepower per liter
22 engine hp per L
Case IH 1455 XL Engine Specs
Engine type
turbocharged diesel
Displacement
402 ci | 6.6 L
Bore and stroke
3.94×5.50 inches | 100 x 140 mm
Rated RPM
2200
Torque
390 lb-ft | 528.8 Nm
Torque RPM
1600
Case IH 1455 XL Fuel, Cooling, Starting & Service Specs
Fuel capacity
52.8 gal | 199.8 L
Starter volts
12
Battery volts
12
Case IH 1455 XL Horsepower Comparison Charts
Engine horsepower comparison
This model
145 hp
Average
210 hp
Low
120 hp
High
380 hp
Displacement comparison
This model
402 ci
Average
520 ci
Low
360 ci
High
750 ci
Torque comparison
This model
390 lb-ft
Average
700 lb-ft
Low
350 lb-ft
High
1,250 lb-ft
Rated RPM comparison
This model
2,200 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH 1455 XL Horsepower FAQ
How much horsepower does the Case IH 1455 XL have?
The listed engine output is 145 hp, below the 210 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 145 hp.
How big is the Case IH 1455 XL engine?
The engine displacement is 402 ci, below the 520 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
How much torque does the Case IH 1455 XL have?
The listed torque is 390 lb-ft, below the 700 lb-ft benchmark average. With 390 lb-ft listed, gearing matters more when the tractor is loaded hard.
What rpm is the Case IH 1455 XL rated at?
The rated speed is 2,200 rpm, close to the 2,100 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
