The Case 1737 skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 650 CCA rating is low for Case skid-steers in this dataset.
Model1737
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
650 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps650 CCA
Low
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
650 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for a Case 1737 skid steer loader is typically a lead-acid starter battery, which provides the necessary power to start the engine and operate other features. It's recommended to check with suppliers for specific battery models compatible with the Case 1737, as they offer a range of options suitable for various makes and models.
LC
Battery location
Where the battery is mounted
The battery on the Case 1737 skid steer loader is typically located under the floor panel, which may need to be removed for access. For specific battery specifications and replacement options, it's best to consult the manufacturer's website or a parts supplier.
ID
Model details
Equipment identity
Brand
Case
Model
1737
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Case 1737 skid steer loader include failure to start, intermittent starting issues, and dashboard warning lights. For battery specifications and replacement details, refer to the Case parts manuals.
?
What battery size fits the Case 1737?
Quick answer
The official battery group size for the Case 1737 skid steer loader is typically Group 24. For replacement, it's essential to ensure the battery meets the specifications for cold cranking amps (CCA) and dimensions suitable for the loader.
?
How many CCA does the Case 1737 need?
Quick answer
The recommended battery for the Case 1737 skid steer loader typically has a Cold Cranking Amps (CCA) rating of around 650 CCA. It's important to ensure that the battery fits properly and meets the specifications for your specific model.
?
What voltage battery does the Case 1737 use?
Quick answer
The Case 1737 skid steer loader typically uses a 12-volt battery. For replacement, it's important to ensure the battery meets the specifications for starting power and compatibility with the machine's electrical system.
?
Where is the battery on the Case 1737?
Quick answer
The battery on the Case 1737 skid steer loader is typically located under the floor panel, which may need to be removed for access. For specific battery specifications and replacement options, it's best to consult the manufacturer's website or a parts supplier.
?
What is the best replacement battery for the Case 1737?
Quick answer
The best replacement battery for a Case 1737 skid steer loader is typically a lead-acid starter battery, which provides the necessary power to start the engine and operate other features. It's recommended to check with suppliers for specific battery models compatible with the Case 1737, as they offer a range of options suitable for various makes and models.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
