The Bobcat S630 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 700 CCA rating is average for Bobcat skid-steers in this dataset.
ModelS630
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
700 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps700 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
700 CCA
RP
Replacement battery
What to match when buying
The Hardcore HCC24SC is a premium Group 24/N50ZZ battery designed for severe-service applications like Bobcat skid-steer loaders, featuring silver-calcium plates, 700 cold cranking amps, and a 20.8 kg weight.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat S630 skid-steer loader is typically located under the operator's seat. For specific battery specifications and replacement details, it's best to consult the owner's manual or the manufacturer's website.
ID
Model details
Equipment identity
Brand
Bobcat
Model
S630
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
The most common symptoms of a failing battery in a Bobcat S630 skid steer loader include slow engine cranking, dim or flickering lights, and repeated need for jump-starts. Bobcat S630 skid steer loaders typically use a Group 24 battery with around 600 cold cranking amps (CCA).
?
What battery size fits the Bobcat S630?
Quick answer
Group 31. Best available fitment is based on closest same-brand/model-family match (S570); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Bobcat S630 need?
Quick answer
The recommended battery for the Bobcat S630 skid-steer loader has a Cold Cranking Amps (CCA) rating of 700 at -18°C. This battery is designed to provide reliable performance in demanding conditions.
?
What voltage battery does the Bobcat S630 use?
Quick answer
The Bobcat S630 skid-steer loader typically uses a 12-volt battery. For specific battery specifications and replacement options, it's best to consult the owner's manual or contact a Bobcat dealer. chat.bobcat.ee
?
Where is the battery on the Bobcat S630?
Quick answer
The battery on the Bobcat S630 skid-steer loader is typically located under the operator's seat. For specific battery specifications and replacement details, it's best to consult the owner's manual or the manufacturer's website.
?
What is the best replacement battery for the Bobcat S630?
Quick answer
The Hardcore HCC24SC is a premium Group 24/N50ZZ battery designed for severe-service applications like Bobcat skid-steer loaders, featuring silver-calcium plates, 700 cold cranking amps, and a 20.8 kg weight.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
