The Bobcat S 160 skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 600 CCA rating is average for Bobcat skid-steers in this dataset.
ModelS 160
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for a Bobcat S160 skid steer loader is a Group 24 battery with at least 600 CCA (Cold Cranking Amps). You can also consider a Group 27 battery for more cranking power if it fits in the compartment.
LC
Battery location
Where the battery is mounted
The Bobcat S160 skid-steer loader battery is located under the operator's seat on the left side of the machine.
ID
Model details
Equipment identity
Brand
Bobcat
Model
S 160
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat S 160?
Quick answer
Group 24. Best available fitment is based on closest same-brand/model-family match (S 160 SJC); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Bobcat S 160 need?
Quick answer
The recommended battery for the Bobcat S160 skid steer loader has a Cold Cranking Amps (CCA) rating of 600. This battery is typically a Group 24 type, which is common for this model.
?
What voltage battery does the Bobcat S 160 use?
Quick answer
12 volts. Skid-steer starting/charging systems for this model family use a 12 V battery system; confirm serial-specific configuration before replacement.
?
Where is the battery on the Bobcat S 160?
Quick answer
The Bobcat S160 skid-steer loader battery is located under the operator's seat on the left side of the machine.
?
What is the best replacement battery for the Bobcat S 160?
Quick answer
The best replacement battery for a Bobcat S160 skid steer loader is a Group 24 battery with at least 600 CCA (Cold Cranking Amps). You can also consider a Group 27 battery for more cranking power if it fits in the compartment.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
