The Bobcat 450 B skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 600 CCA rating is average for Bobcat skid-steers in this dataset.
Model450 B
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
The Bobcat 450 B skid steer loader typically requires a Group 24 battery with at least 600 cold cranking amps (CCA). You can find suitable replacements from various suppliers, including Bobcat dealers and automotive battery retailers.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat 450 B skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement options, it's best to consult the owner's manual or contact a Bobcat dealer.
ID
Model details
Equipment identity
Brand
Bobcat
Model
450 B
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
The Bobcat 450 B skid-steer loader uses a Group 24 battery with 600 cold cranking amps (CCA) as specified for that model. Owners report that a quality automotive battery of the correct group size works if it fits securely and the charging system is functioning properly.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat 450 B?
Quick answer
The official battery group size for the Bobcat 450 B skid steer loader is Group 24. For replacement, it's important to check compatibility with your specific model and serial number.
?
How many CCA does the Bobcat 450 B need?
Quick answer
600 CCA. Best available fitment is based on closest same-brand/model-family match (453); an equal-or-higher CCA replacement is acceptable if the physical size and terminals match.
?
What voltage battery does the Bobcat 450 B use?
Quick answer
The official battery voltage for the Bobcat S450 Skid-Steer Loader is 12 volts. For replacement specifications, it's best to consult the owner's manual or contact a local dealer for the exact battery model needed.
?
Where is the battery on the Bobcat 450 B?
Quick answer
The battery on the Bobcat 450 B skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement options, it's best to consult the owner's manual or contact a Bobcat dealer.
?
What is the best replacement battery for the Bobcat 450 B?
Quick answer
The Bobcat 450 B skid steer loader typically requires a Group 24 battery with at least 600 cold cranking amps (CCA). You can find suitable replacements from various suppliers, including Bobcat dealers and automotive battery retailers.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
