The Kubota B3200 takes 5.7 quarts / 5.4 litres of engine oil.
Kubota B3200 Oil Capacity and Type
Engine Oil Capacity
5.7 qt / 5.4 L
Recommended Oil Name
Kubota Genuine Engine Oil or equivalent
Recommended Oil Type
Diesel-rated SAE 10W-30, 10W-40, or 15W-40 engine oil
Engine
Kubota V1505 diesel engine
Engine Power
32 HP gross
PTO Power
23 HP
Cylinders
4-cylinder diesel
Displacement
91.5 cu in / 1.5 L
Cooling System
Liquid-cooled
Oil Filter
Kubota HH160-32093 or correct equivalent
Oil Change Interval
Every 200 hours after initial service
How Much Oil Does a Kubota B3200 Take?
The Kubota B3200 takes 5.7 quarts / 5.4 litres of engine oil.
Use a quality diesel-rated SAE 10W-30, 10W-40, or 15W-40 engine oil. For most owners, 10W-30 or 10W-40 is a good all-round choice, while 15W-40 is commonly used in warmer conditions.
Fill close to 5.4 litres, run the engine briefly, shut it off, wait a few minutes, then check the dipstick. Top up slowly if needed. Do not overfill it.
Quick Specs Overview
5.7 qtEngine Oil
10W-30 / 15W-40Oil Type
200 hrsOil Interval
32 HPEngine Power
Best Oil to Use
Kubota Genuine diesel engine oil
SAE 10W-30 diesel-rated engine oil
SAE 10W-40 diesel-rated engine oil
SAE 15W-40 diesel-rated engine oil
Oil meeting a suitable diesel engine service classification
Replace the oil filter at every engine oil change
Oil Capacity Comparison
Kubota B3200
5.7 qt
Kubota B2920
4.0 qt
Kubota B3030
4.7 qt
Kubota L3200
5.7 qt
Oil Change Intervals
First Engine Oil Service
Initial service at 50 hours
Engine Oil
Every 200 hours after initial service
Engine Oil Filter
Replace every engine oil change
Air Filter
Check regularly; replace as needed
Fuel Filter
Inspect and replace as part of regular diesel service
Transmission / Hydraulic Oil
Service according to operator manual schedule
Hydraulic Filters
Replace according to operator manual schedule
Front Axle Oil
Check regularly on 4WD models
Other Kubota B3200 Fluid Capacities
Engine Oil
5.7 qt / 5.4 L
Fuel Tank
8.1 gal / 30.7 L
Cooling System
4.7 qt / 4.4 L
Transmission / Hydraulic System
16.7 qt / about 15.8 L
Transmission Type
Hydrostatic transmission
Recommended Hydraulic Oil
Kubota UDT or Super UDT fluid
Kubota B3200 Engine Specs
Engine
Kubota V1505 diesel
Displacement
91.5 cu in / 1.5 L
Cylinders
4-cylinder
Fuel Type
Diesel
Aspiration
Naturally aspirated
Cooling System
Liquid-cooled
Rated RPM
2800 rpm
Gross Engine Power
32 HP
PTO Power
23 HP
Starter
Electric, 12 volt
Lubrication
Pressurized lubrication with replaceable oil filter
Common Mistakes
Using gasoline-engine oil instead of diesel-rated engine oil
Confusing engine oil with Kubota UDT hydraulic/transmission fluid
Overfilling past the 5.7 quart / 5.4 litre engine oil capacity
Skipping the oil filter during an oil change
Assuming the B3200 has the same oil capacity as smaller B-series Kubota tractors
Not checking the dipstick after running the engine
Summary
The Kubota B3200 takes 5.7 quarts / 5.4 litres of engine oil. The best oil choice is a diesel-rated SAE 10W-30, 10W-40, or 15W-40 engine oil, such as Kubota Genuine engine oil or a quality equivalent. The B3200 uses a Kubota V1505 4-cylinder liquid-cooled diesel engine with around 32 gross horsepower and 23 PTO horsepower. Change the engine oil and filter after the initial service, then every 200 hours, and always confirm the final oil level with the dipstick.
