The Caterpillar gp30n forklift (2025-2026) is characterised by typical engine power at 62.9 hp (46.9 kW) and below-average weight at 9,348 lb (4.24 t). The listed total width is 5.54 ft (1,690 mm).
Specification profile
Forklift • 2025-2026
Weight: 9,348 lb (4.24 t)Engine power: 62.9 hp (46.9 kW)Engine speed at max torque: 2,700 rpmTotal Width: 5.54 ft (1,690 mm)
9,348 lb (4.24 t)Weight
62.9 hp (46.9 kW)Engine power
2,700 rpmEngine speed at max torque
5.54 ft (1,690 mm)Total Width
7.12 ft (2,170 mm)Construction Height
10.8 ft (3.3 m)Lifting Height
19/19.5 km/hTravel Speed With / Without Load
188/1600 NmMaximum torque
How it compares
Low, average or high?
Engine power
Average
62.9 hp (46.9 kW)
Low 33.5 hp (25 kW)Typical 67.5 hp (50.3 kW)High 112 hp (83.8 kW)
Engine power is close to the typical figure.
Weight
Below average
9,348 lb (4.24 t)
Low 5,644 lb (2.56 t)Typical 12,143 lb (5.51 t)High 26,358 lb (12 t)
Weight is below the typical figure.
Turning Radius
Average
7.81 ft (2.38 m)
Low 5.91 ft (1.8 m)Typical 7.95 ft (2.42 m)High 12 ft (3.67 m)
Turning Radius is close to the typical figure.
Construction Height
Average
7.12 ft (2,170 mm)
Low 6.68 ft (2,035 mm)Typical 7.29 ft (2,221 mm)High 8.4 ft (2,561 mm)
Construction Height is close to the typical figure.
Displacement
Below average
0.66 US gal (2.49 L)
Low 0.5 US gal (1.9 L)Typical 0.79 US gal (2.99 L)High 1.19 US gal (4.5 L)
Displacement is below the typical figure.
Lifting Height
Average
10.8 ft (3.3 m)
Low 7.14 ft (2.17 m)Typical 11.1 ft (3.38 m)High 18 ft (5.5 m)
Lifting Height is close to the typical figure.
Visual overview
Key measurements
Measurements
Related measurements grouped for faster scanning.
Related measurements
Additional published measurements that share the same unit.
Overview
Model information
| Manufacturer | Caterpillar |
|---|---|
| Model | gp30n forklift |
| Category | Forklift |
| Model year / production | 2025-2026 |
Full specifications
Technical details
Performance
Engine power62.9 hp (46.9 kW)
Maximum torque188/1600 Nm
Engine speed at max torque2,700 rpm
Travel Speed With / Without Load19/19.5 km/h
Dimensions
Construction Height7.12 ft (2,170 mm)
Lifting Height10.8 ft (3.3 m)
Total Width5.54 ft (1,690 mm)
Turning Radius7.81 ft (2.38 m)
Capacity & weight
Weight9,348 lb (4.24 t)
Hoisting With / Without Load0.52/0.53 m/s
Lowering With Load0,53/0,5 m/s
Nominal Load at COG6,614 lb (3 t)
Engine & drivetrain
Displacement0.66 US gal (2.49 L)
Engine typeGK25E
Number of cylinders4.0
Setup & fitment
Standard tyresFront: 28×9-15-12PR / Rear: 6.50-10-10PR
Other specifications
Model seriesGP
Centre of Gravity19.7 in (500 mm)
Max. Climbing Ability32/60 %
Related Posts:
