The Caterpillar 260 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 1000 CCA rating is high for Caterpillar skid-steers in this dataset.
How this battery compares
Compared with other Caterpillar skid-steer battery ratings in this dataset.
Battery specification
Model-specific replacement data
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 1000 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Battery location
Where the battery is mounted
Family-match guidance: The battery on the Caterpillar 262D skid steer loader is typically located under the rear left side of the machine, accessible via a removable cover near the engine compartment. Replacement requires no specialized tools and includes repair instructions in the Cat Self-Service Option. Verify the exact access panel/compartment for the machine serial number before service.
Model details
Equipment identity
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
What battery size fits the Caterpillar 260?
Quick answer
Group 31. Best available fitment is based on closest same-brand/model-family match (250); confirm tray dimensions, terminal layout, and serial number before ordering.
How many CCA does the Caterpillar 260 need?
Quick answer
1000 CCA. Best available fitment is based on closest same-brand/model-family match (250); an equal-or-higher CCA replacement is acceptable if the physical size and terminals match.
What voltage battery does the Caterpillar 260 use?
Quick answer
12 volts. Skid-steer starting/charging systems for this model family use a 12 V battery system; confirm serial-specific configuration before replacement.
Where is the battery on the Caterpillar 260?
Quick answer
Family-match guidance: The battery on the Caterpillar 262D skid steer loader is typically located under the rear left side of the machine, accessible via a removable cover near the engine compartment. Replacement requires no specialized tools and includes repair instructions in the Cat Self-Service Option. Verify the exact access panel/compartment for the machine serial number before service.
What is the best replacement battery for the Caterpillar 260?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 1000 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.



