The Caterpillar 232 skid-steer battery size is Group 65, and it uses a 12-volt electrical system. Its 1000 CCA rating is high for Caterpillar skid-steers in this dataset.
Model232
BrandCaterpillar
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
1000 CCA
Battery size
Group 65
Battery location
See details below
How this battery compares
Compared with other Caterpillar skid-steer battery ratings in this dataset.
Cold cranking amps1000 CCA
High
LowAverageHigh
Low 125 CCAMedian 850 CCAHigh 1400 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 65
Cold cranking amps
1000 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 65 with about 1000 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
The battery on the Caterpillar 232 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement instructions, refer to the manufacturer's guidelines on.
ID
Model details
Equipment identity
Brand
Caterpillar
Model
232
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Caterpillar 232 skid steer loader include difficulty starting the engine, dimming lights, and electrical issues. For replacement, it typically requires a Cat 12-volt maintenance-free battery.
?
What battery size fits the Caterpillar 232?
Quick answer
The official battery group size for the Caterpillar 232 skid steer loader is Group 65 BCI. For replacement, you can consider Cat part 230-6368, which is a 12-Volt, 65 BCI heavy-duty battery with 850 cold cranking amps (CCA) designed for tough environments.
?
How many CCA does the Caterpillar 232 need?
Quick answer
The recommended official Caterpillar 232 skid steer loader battery has a Cold Cranking Amps (CCA) rating of 850 for the standard battery and 1000 CCA for the heavy-duty option. For replacement, you would typically need a Cat 12-volt, maintenance-free, wet battery.
?
What voltage battery does the Caterpillar 232 use?
Quick answer
The Caterpillar 232 Skid Steer Loader uses a 12-volt battery. For replacement, you can find various heavy-duty options that meet the specifications required for optimal performance.
?
Where is the battery on the Caterpillar 232?
Quick answer
The battery on the Caterpillar 232 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement instructions, refer to the manufacturer's guidelines on.
?
What is the best replacement battery for the Caterpillar 232?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 65 with about 1000 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Caterpillar website for manufacturer information.
