The Case TR 380 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 750 CCA rating is average for Case skid-steers in this dataset.
ModelTR 380
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
750 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps750 CCA
Average
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
750 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 750 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
The battery on the Case TR 380 skid steer loader is located beneath the foot plate, which is secured by bolts and a metal lip, making it somewhat difficult to access. For replacement, the entire battery case must be removed to get to the battery itself.
ID
Model details
Equipment identity
Brand
Case
Model
TR 380
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Case TR 380?
Quick answer
The official battery group size for the Case TR380 skid steer loader is Group 31. For replacement, it's important to ensure the battery meets the specifications required for the loader's performance.
?
How many CCA does the Case TR 380 need?
Quick answer
750 CCA. Best available fitment is based on closest same-brand/model-family match (TR380); an equal-or-higher CCA replacement is acceptable if the physical size and terminals match.
?
What voltage battery does the Case TR 380 use?
Quick answer
The Case TR380 skid steer loader uses a 12-volt battery. For replacement, ensure you select a low-maintenance battery that meets the specifications for your model.
?
Where is the battery on the Case TR 380?
Quick answer
The battery on the Case TR 380 skid steer loader is located beneath the foot plate, which is secured by bolts and a metal lip, making it somewhat difficult to access. For replacement, the entire battery case must be removed to get to the battery itself.
?
What is the best replacement battery for the Case TR 380?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 750 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
