The Case SR240 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 950 CCA rating is high for Case skid-steers in this dataset.
ModelSR240
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
950 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps950 CCA
High
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
950 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
Family-match guidance: The battery on the Case SR250 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific replacement details, it's best to consult the owner's manual or a parts dealer. Verify the exact access panel/compartment for the machine serial number before service.
ID
Model details
Equipment identity
Brand
Case
Model
SR240
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Case SR240 skid steer loader include failure to start, intermittent starting issues, and dashboard warning lights. For battery specifications and replacement details, refer to the Case parts manuals.
?
What battery size fits the Case SR240?
Quick answer
The official battery group size for the Case SR240 Skid Steer Loader is Group 31. For replacement, it's important to check the specific requirements based on your model and usage.
?
How many CCA does the Case SR240 need?
Quick answer
The Case SR240 skid steer loader uses a heavy-duty battery rated at 950 CCA (Cold Cranking Amps) for reliable starts in cold weather. For replacement, it's best to consult the manufacturer's specifications or a trusted parts supplier.
?
What voltage battery does the Case SR240 use?
Quick answer
The official Case SR240 skid steer loader uses a 12-volt battery.
?
Where is the battery on the Case SR240?
Quick answer
Family-match guidance: The battery on the Case SR250 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific replacement details, it's best to consult the owner's manual or a parts dealer. Verify the exact access panel/compartment for the machine serial number before service.
?
What is the best replacement battery for the Case SR240?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
