The Case SR200 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 650 CCA rating is low for Case skid-steers in this dataset.
ModelSR200
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
650 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps650 CCA
Low
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
650 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for the Case SR200 skid steer loader is typically a 12V battery with a capacity of around 650 CCA (Cold Cranking Amps). It's recommended to check the specific model and year for exact specifications.
LC
Battery location
Where the battery is mounted
The battery on the Case SR200 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific details, it's best to consult the owner's manual or the manufacturer's website.
ID
Model details
Equipment identity
Brand
Case
Model
SR200
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Case SR200 skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Case SR200 skid steer loader include failure to start, intermittent starting issues, and dashboard warning lights. If the battery is weak or damaged, it may need to be replaced with a compatible unit as specified in the Case parts manuals.
?
What battery size fits the Case SR200?
Quick answer
The official battery group size for the Case SR200 skid steer loader is Group 31. For replacement, it's important to ensure compatibility with the specifications of the loader.
?
How many CCA does the Case SR200 need?
Quick answer
?
What voltage battery does the Case SR200 use?
Quick answer
The official battery voltage for the Case SR200 skid steer loader is 12 volts. For replacement, it's important to check the specific model's manual for compatible battery specifications.
?
Where is the battery on the Case SR200?
Quick answer
The battery on the Case SR200 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific details, it's best to consult the owner's manual or the manufacturer's website.
?
What is the best replacement battery for the Case SR200?
Quick answer
The best replacement battery for the Case SR200 skid steer loader is typically a 12V battery with a capacity of around 650 CCA (Cold Cranking Amps). It's recommended to check the specific model and year for exact specifications.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
