The Case SR150 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 800 CCA rating is average for Case skid-steers in this dataset.
ModelSR150
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
800 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps800 CCA
Average
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
800 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for the Case SR150 skid steer loader is typically a 12-volt battery with a minimum of 120 amps. For specific battery models, it's recommended to check with authorized dealers or the manufacturer's specifications.
LC
Battery location
Where the battery is mounted
The battery on the Case SR150 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or the manufacturer's website.
ID
Model details
Equipment identity
Brand
Case
Model
SR150
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Case SR150 skid steer loader, first disconnect the negative battery cable, then disconnect the positive battery cable, and finally remove the old battery. After that, install the new battery by connecting the positive cable first, followed by the negative cable.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Case SR150 skid steer loader include failure to start, intermittent starting issues, and dashboard warning lights. For battery specifications and replacement details, refer to the Case parts manuals.
?
What battery size fits the Case SR150?
Quick answer
Group 31. Best available fitment is based on closest same-brand/model-family match (SR 175); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Case SR150 need?
Quick answer
800 CCA. Best available fitment is based on closest same-brand/model-family match (SR 175); an equal-or-higher CCA replacement is acceptable if the physical size and terminals match.
?
What voltage battery does the Case SR150 use?
Quick answer
The official battery voltage for the Case SR150 skid steer loader is 12 volts. For replacement, it's important to ensure compatibility with this voltage specification..nz
?
Where is the battery on the Case SR150?
Quick answer
The battery on the Case SR150 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or the manufacturer's website.
?
What is the best replacement battery for the Case SR150?
Quick answer
The best replacement battery for the Case SR150 skid steer loader is typically a 12-volt battery with a minimum of 120 amps. For specific battery models, it's recommended to check with authorized dealers or the manufacturer's specifications.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
