The Case SR130 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 750 CCA rating is average for Case skid-steers in this dataset.
ModelSR130
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
750 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps750 CCA
Average
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
750 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for the Case SR130 skid steer loader is a deep-cycle battery designed for heavy equipment, typically with high cold-cranking amps (CCA) and reserve capacity to handle the loader's electrical demands.
LC
Battery location
Where the battery is mounted
The battery on the Case SR130 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific details, it's best to consult the owner's manual or the manufacturer's website.
ID
Model details
Equipment identity
Brand
Case
Model
SR130
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Case SR130 skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal.
!
Bad battery symptoms
Signs the battery may be failing
The most common symptoms of a bad battery in a Case SR130 skid steer loader include failure to start or intermittent starting issues, dim or flickering lights, and dashboard warning lights or error codes.
?
What battery size fits the Case SR130?
Quick answer
Group 31. Best available fitment is based on closest same-brand/model-family match (SR130B); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Case SR130 need?
Quick answer
The recommended battery for the Case SR130 skid steer loader typically has a Cold Cranking Amps (CCA) rating of around 650 to 750 CCA. It's important to check the specific model requirements for the exact specifications.
?
What voltage battery does the Case SR130 use?
Quick answer
The official battery voltage for the Case SR130 skid steer loader is 12 volts. For replacement, it's important to check the specific model's manual for compatible battery specifications.
?
Where is the battery on the Case SR130?
Quick answer
The battery on the Case SR130 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific details, it's best to consult the owner's manual or the manufacturer's website.
?
What is the best replacement battery for the Case SR130?
Quick answer
The best replacement battery for the Case SR130 skid steer loader is a deep-cycle battery designed for heavy equipment, typically with high cold-cranking amps (CCA) and reserve capacity to handle the loader's electrical demands.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
