The Case 440 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 600 CCA rating is low for Case skid-steers in this dataset.
Model440
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Low
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for a Case 440 skid steer loader is typically an AGM (Absorbent Glass Mat) battery, which offers spill-proof design, high power output, and resistance to vibration, making it ideal for heavy equipment use.
LC
Battery location
Where the battery is mounted
The battery on the Case 440 Skid Steer Loader is typically located under the seat or in the rear compartment of the machine. For replacement, ensure you check the specifications for the correct type and size of battery needed.
ID
Model details
Equipment identity
Brand
Case
Model
440
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Case 440 skid steer loader include failure to start, intermittent starting issues, and dashboard warning lights. If the battery is weak or damaged, it may need to be replaced with a compatible unit as specified in the Case parts manuals.
?
What battery size fits the Case 440?
Quick answer
The official battery group size for the Case 440 Skid Steer Loader is Group 31. For replacement, it's important to choose a battery that meets the specifications for cold cranking amps (CCA) and voltage required for optimal performance.
?
How many CCA does the Case 440 need?
Quick answer
The recommended cold cranking amps (CCA) for the Case 440 Skid Steer Loader battery is typically around 600 CCA to ensure reliable starting performance, especially in cold conditions. Always check the specific model's manual for precise specifications.
?
What voltage battery does the Case 440 use?
Quick answer
The official battery voltage for the Case 440 Skid Steer Loader is 12 volts. When replacing the battery, ensure it meets the specifications for cold cranking amps (CCA) and other relevant ratings for optimal performance.
?
Where is the battery on the Case 440?
Quick answer
The battery on the Case 440 Skid Steer Loader is typically located under the seat or in the rear compartment of the machine. For replacement, ensure you check the specifications for the correct type and size of battery needed.
?
What is the best replacement battery for the Case 440?
Quick answer
The best replacement battery for a Case 440 skid steer loader is typically an AGM (Absorbent Glass Mat) battery, which offers spill-proof design, high power output, and resistance to vibration, making it ideal for heavy equipment use.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
