The Case 1845 C skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 1000 CCA rating is high for Case skid-steers in this dataset.
Model1845 C
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
1000 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps1000 CCA
High
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
1000 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for a Case 1845C skid steer loader is a Group 31 battery, which typically has a capacity of around 1000 CCA (cold cranking amps). It's recommended to avoid deep cycle batteries for this application.
LC
Battery location
Where the battery is mounted
The battery on a Case 1845C skid steer loader is accessed by removing the left side panel and raising the loader arms, and owners report using a Group 31 battery with threaded posts or bolt terminals.
ID
Model details
Equipment identity
Brand
Case
Model
1845 C
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Case 1845 C skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal. YUMPU
!
Bad battery symptoms
Signs the battery may be failing
The most common bad battery symptoms for a Case 1845C skid steer loader include slow cranking, dim lights, or failure to start, while replacement typically requires a Group 29H or D132475 battery with around 650 CCA.
?
What battery size fits the Case 1845 C?
Quick answer
The official battery group size for the Case 1845C skid steer loader is Group 31. This size is recommended for optimal performance and compatibility with the machine.
?
How many CCA does the Case 1845 C need?
Quick answer
The recommended battery for the Case 1845C skid steer loader is typically a Group 31 battery with a cold cranking amps (CCA) rating of around 1000 CCA. It's important to ensure that the battery fits properly and has the correct terminal type for your model.
?
What voltage battery does the Case 1845 C use?
Quick answer
The official battery voltage for the Case 1845C skid steer loader is 12 volts.
?
Where is the battery on the Case 1845 C?
Quick answer
The battery on a Case 1845C skid steer loader is accessed by removing the left side panel and raising the loader arms, and owners report using a Group 31 battery with threaded posts or bolt terminals.
?
What is the best replacement battery for the Case 1845 C?
Quick answer
The best replacement battery for a Case 1845C skid steer loader is a Group 31 battery, which typically has a capacity of around 1000 CCA (cold cranking amps). It's recommended to avoid deep cycle batteries for this application.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
