The Bobcat S 185 H SJC skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 600 CCA rating is average for Bobcat skid-steers in this dataset.
ModelS 185 H SJC
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for a Bobcat S185 skid steer loader is a Group 24 battery with at least 600 cold cranking amps (CCA). You can find options from Bobcat dealers or other suppliers that meet these specifications.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat S185 H SJC skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or contact a Bobcat dealer.
ID
Model details
Equipment identity
Brand
Bobcat
Model
S 185 H SJC
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Bobcat S 185 H SJC?
Quick answer
The Bobcat S185 Skid Steer Loader requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA) for optimal performance. For replacement, you can find options from various suppliers, including Bobcat dealers.
?
How many CCA does the Bobcat S 185 H SJC need?
Quick answer
The Bobcat S185 skid-steer loader uses a Group 24 battery with 600 cold cranking amps (CCA) as the official replacement.
?
What voltage battery does the Bobcat S 185 H SJC use?
Quick answer
The Bobcat S185 Skid Steer Loader uses a 12-volt battery. For replacement, it typically requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA).
?
Where is the battery on the Bobcat S 185 H SJC?
Quick answer
The battery on the Bobcat S185 H SJC skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or contact a Bobcat dealer.
?
What is the best replacement battery for the Bobcat S 185 H SJC?
Quick answer
The best replacement battery for a Bobcat S185 skid steer loader is a Group 24 battery with at least 600 cold cranking amps (CCA). You can find options from Bobcat dealers or other suppliers that meet these specifications.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
