The Bobcat S 185 H AHC skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 600 CCA rating is average for Bobcat skid-steers in this dataset.
ModelS 185 H AHC
BrandBobcat
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Bobcat skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Average
LowAverageHigh
Low 190 CCAMedian 650 CCAHigh 1000 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
The Bobcat S185 requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA). You can also consider a Group 27 battery for more power, as it fits and offers higher cranking capacity.
LC
Battery location
Where the battery is mounted
The battery on the Bobcat S185 skid-steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement options, it's best to consult the owner's manual or contact a Bobcat dealer.
ID
Model details
Equipment identity
Brand
Bobcat
Model
S 185 H AHC
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Bobcat S185 H AHC skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Bobcat S185 H AHC skid steer loader include difficulty starting the engine, dimming lights, and electrical issues. The S185 typically requires a Group 24 battery with 600 CCA for optimal performance.
?
What battery size fits the Bobcat S 185 H AHC?
Quick answer
The Bobcat S185 skid-steer loader uses a Group 24 battery.
?
How many CCA does the Bobcat S 185 H AHC need?
Quick answer
The Bobcat S185 skid-steer loader uses a Group 24 battery; owners report using Group 27 or Group 31 batteries when a Group 24 does not fit, and a quality automotive battery can work if properly secured and maintained.
?
What voltage battery does the Bobcat S 185 H AHC use?
Quick answer
The Bobcat S185 Skid-Steer Loader uses a 12-volt battery. For replacement, it typically requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA).
?
Where is the battery on the Bobcat S 185 H AHC?
Quick answer
The battery on the Bobcat S185 skid-steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement options, it's best to consult the owner's manual or contact a Bobcat dealer.
?
What is the best replacement battery for the Bobcat S 185 H AHC?
Quick answer
The Bobcat S185 requires a Group 24 battery with a minimum of 600 cold cranking amps (CCA). You can also consider a Group 27 battery for more power, as it fits and offers higher cranking capacity.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Bobcat website for manufacturer information.
