Weight summary
The published John Deere 1023E weight is 1,345–1,576 lb (610–714 kg). The primary figure used for comparisons is 1,345 lb (610 kg), listed as Operating. The published configurations span 231 lb, a 17.2% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Very light
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | John Deere |
|---|---|
| Model | 1023E |
| Category | Farm tractor |
| Model years | 2011 – 2025 |
| Tractor type | Utility Tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Operating | — | 1,345 lb | 610 kg | 0.67 | — |
| Max front axle | — | 1,349 lb | 611 kg | 0.67 | — |
| Max rear axle | — | 1,576 lb | 714 kg | 0.79 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Kubota BX1870 (1345 lb)
- Kubota BX1870-1 (1345 lb)
- Yanmar YM173 (1345 lb)
- Ford 1200 (1344 lb)
- Case IH 235 (1350 lb)
Closest comparable tractors
- New Holland Boomer TZ22DA (1320 lb)
- New Holland Boomer TZ25DA (1320 lb)
- New Holland Boomer TZ18DA (1311 lb)
- Kubota B2410 (1367 lb, 24 hp)
- Kubota B7610 (1367 lb, 24 hp)
John Deere 1023E weight FAQ
How much does a John Deere 1023E weigh?
The John Deere 1023E weighs 1,345 lb (610 kg) using the published Operating figure. Across the published configurations on this page, weight ranges from 1,345 to 1,576 lb (610 to 714 kg).
What is the operating weight of the John Deere 1023E?
The published operating weight is 1,345 lb (610 kg). This is usually a more useful real-world figure than a bare shipping specification, although ballast, loader, fuel, implements and tire setup can still increase actual working weight.
Is the John Deere 1023E a lightweight utility tractor?
Yes. The representative figure sits at about the 5th percentile, lighter than roughly 95% of the utility tractor peers. That puts it in the very light range for this comparison. It is 3,918 lb lighter than the peer-group average of 5,263 lb.
How wide is the John Deere 1023E for transport?
The maximum published tractor width is 47.2 in (3.9 ft). That is 54.8 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the John Deere 1023E weight-to-horsepower ratio?
Using the page’s representative 1,345 lb weight and 23.5 hp power figure, the tractor carries about 57.2 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the John Deere 1023E weigh?
The representative published weight is about 0.67 US tons, while the full published range is 0.67–0.79 US tons. Loaded transport weight can be higher than the tractor specification.
