The Case IH Farmall DX60 tractor weighs 4,209 lb (1,909 kg) using its published Weight synchro weight. Other useful published figures are 4,238 lb (Weight — power shuttle). That places it around the 47th percentile among comparable utility tractors, close to the middle of its peer group.
The published Case IH Farmall DX60 weight is 4,209–4,238 lb (1,909–1,922 kg). The primary figure used for comparisons is 4,209 lb (1,909 kg), listed as Weight — synchro. The published configurations span 29 lb, a 0.7% difference from the lightest listed setup.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Average
4,209 lb
Low1,537 lb
This model4,209 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight4,209–4,238 lb (1,909–1,922 kg)
Overall weight bandMidweight
Tractor typeUtility Tractor
Physical sizeMid-size
Max length137.3 in (348 cm)
Max width64.4 in (163 cm)
Overview
Model information
Manufacturer
Case IH
Model
Farmall DX60
Category
Farm tractor
Model years
2007 – 2008
Tractor type
Utility Tractor
Published weight variants
2
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
synchro
4,209 lb
1,909 kg
2.1
—
Weight
power shuttle
4,238 lb
1,922 kg
2.12
—
Configuration effect
How configuration changes the weight
29 lbLightest to heaviest · 0.7% spread across published variants
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase74.8 in (189 cm)
Length137.3 in (348 cm)
Width64.4 in (163 cm)
Height95 in (241 cm)
Power & weight ratios
Weight per foot of length367.9 lb/ft
Wheelbase / length54.5%
Transport snapshot
Primary published weight4,209 lb (1,909 kg)
Maximum published weight4,238 lb (1,922 kg)
Maximum US-ton equivalent2.12 US tons
Maximum published width64.4 in (163 cm)
Published width over 102 inNo
Weight context
Weight range4,209–4,238 lb (1,909–1,922 kg)
Primary weight basisWeight — synchro
Peer positionAverage among Utility Tractor peers · 47th percentile
Physical size classMid-size
For transport planning, the representative published tractor weight is about 4,209 lb (2.1 US tons); published configurations reach 4,238 lb (2.12 US tons); the widest published tractor dimension is 64.4 in (5.4 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Case IH Farmall 55 (4209 lb)
Case IH Farmall 60 (4209 lb)
Massey Ferguson 133 Super (4211 lb)
Yanmar F475 (4211 lb)
John Deere 5210 (4205 lb)
Closest comparable tractors
Massey Ferguson 133 Super (4211 lb, 42 hp)
Yanmar F475 (4211 lb, 46.4 hp)
John Deere 5210 (4205 lb, 53 hp)
Massey Ferguson 240 (4215 lb, 46 hp)
International Harvester 276 (4189 lb, 37.5 hp)
Common questions
Case IH Farmall DX60 weight FAQ
How much does a Case IH Farmall DX60 weigh?
The Case IH Farmall DX60 weighs 4,209 lb (1,909 kg) using the published Weight — synchro figure. Across the published configurations on this page, weight ranges from 4,209 to 4,238 lb (1,909 to 1,922 kg).
Is the Case IH Farmall DX60 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 47th percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 1,054 lb lighter than the peer-group average of 5,263 lb.
How wide is the Case IH Farmall DX60 for transport?
The maximum published tractor width is 64.4 in (5.4 ft). That is 37.6 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
How many tons does the Case IH Farmall DX60 weigh?
The representative published weight is about 2.1 US tons, while the full published range is 2.1–2.12 US tons. Loaded transport weight can be higher than the tractor specification.
