The Case IH Farmall 100C tractor weighs 6,989 lb (3,170 kg) using its published 2WD ROPS weight. Other useful published figures are 8,157 lb (4WD Cab) and 7,672 lb (4WD ROPS). That places it around the 74th percentile among comparable utility tractors, on the heavier side of its peer group.
The published Case IH Farmall 100C weight is 6,989–8,157 lb (3,170–3,700 kg). The primary figure used for comparisons is 6,989 lb (3,170 kg), listed as 2WD ROPS. The published configurations span 1,168 lb, a 16.7% difference from the lightest listed setup.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Heavy
6,989 lb
Low1,537 lb
This model6,989 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight6,989–8,157 lb (3,170–3,700 kg)
Overall weight bandHeavy
Tractor typeUtility Tractor
Primary horsepower99 hp / 73.8 kW
Max length163.1 in (414 cm)
Max width75.7 in (192 cm)
Overview
Model information
Manufacturer
Case IH
Model
Farmall 100C
Category
Farm tractor
Model years
2015 – 2027
Tractor type
Utility Tractor
Published weight variants
4
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
2WD ROPS
—
6,989 lb
3,170 kg
3.49
—
4WD ROPS
—
7,672 lb
3,480 kg
3.84
—
2WD Cab
—
7,474 lb
3,390 kg
3.74
—
4WD Cab
—
8,157 lb
3,700 kg
4.08
—
Configuration effect
How configuration changes the weight
1,168 lbLightest to heaviest · 16.7% spread across published variants
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase92.2 in (234 cm)
Length163.1 in (414 cm)
Width75.7 in (192 cm)
Height106.5 in (270 cm)
Power & weight ratios
Primary power99 hp (73.8 kW)
Power basisEngine (gross)
Weight per horsepower70.6 lb/hp
Weight per foot of length514.2 lb/ft
Wheelbase / length56.5%
Transport snapshot
Primary published weight6,989 lb (3,170 kg)
Maximum published weight8,157 lb (3,700 kg)
Maximum US-ton equivalent4.08 US tons
Maximum published width75.7 in (192 cm)
Published width over 102 inNo
Weight context
Weight range6,989–8,157 lb (3,170–3,700 kg)
Primary weight basis2WD ROPS
Peer positionHeavy among Utility Tractor peers · 74th percentile
Physical size classAbove-average size
For transport planning, the representative published tractor weight is about 6,989 lb (3.49 US tons); published configurations reach 8,157 lb (4.08 US tons); the widest published tractor dimension is 75.7 in (6.3 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Case IH Farmall 110C (6989 lb)
Case IH Farmall 120C (6989 lb)
Case IH Farmall 90C (6989 lb)
New Holland T4.100 (6989 lb)
New Holland T4.110 (6989 lb)
Closest comparable tractors
New Holland T4.100 (6989 lb, 99 hp)
New Holland PowerStar 100 (6988 lb, 99 hp)
New Holland TL5060 (7022 lb, 100 hp)
J.I. Case 1210 (7100 lb)
John Deere 5603 (7145 lb, 99 hp)
Common questions
Case IH Farmall 100C weight FAQ
How much does a Case IH Farmall 100C weigh?
The Case IH Farmall 100C weighs 6,989 lb (3,170 kg) using the published 2WD ROPS figure. Across the published configurations on this page, weight ranges from 6,989 to 8,157 lb (3,170 to 3,700 kg).
How much heavier is the 4WD Case IH Farmall 100C than the 2WD model?
Published 2WD weight is 6,989–7,474 lb (3,170–3,390 kg), while published 4WD weight is 7,672–8,157 lb (3,480–3,700 kg). On a midpoint basis, the published 4WD configurations are about 683 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the Case IH Farmall 100C a heavy utility tractor?
Yes. The representative figure sits at about the 74th percentile, heavier than roughly 74% of the utility tractor peers. That puts it in the heavy range for this comparison. It is 1,726 lb heavier than the peer-group average of 5,263 lb.
How wide is the Case IH Farmall 100C for transport?
The maximum published tractor width is 75.7 in (6.3 ft). That is 26.3 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Case IH Farmall 100C weight-to-horsepower ratio?
Using the page’s representative 6,989 lb weight and 99 hp power figure, the tractor carries about 70.6 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Case IH Farmall 100C weigh?
The representative published weight is about 3.49 US tons, while the full published range is 3.49–4.08 US tons. Loaded transport weight can be higher than the tractor specification.
