The Caterpillar 395 crawler excavator was introduced in 2020, with an operating weight of 207,235 lb (94 t), engine output of 543 hp (405 kW) and a bucket capacity of 4.84 yd³ (3.7 m³). Maximum digging depth is 35.3 ft (10.75 m), maximum horizontal reach is 51.6 ft (15.73 m) and it uses the C18 Acert engine.
Caterpillar Crawler Excavator Specifications
Crawler Excavator • Introduced 2020 • C18 Acert
Weight: 207,235 lb (94 t)Power: 543 hp (405 kW)Bucket: 4.84 yd³ (3.7 m³)Dig depth: 35.3 ft (10.75 m)
Key specifications
207,235 lb (94 t)Operating weight
543 hp (405 kW)Engine power
4.84 yd³ (3.7 m³)Bucket capacity
35.3 ft (10.75 m)Digging depth
51.6 ft (15.73 m)Horizontal reach
82,055 lbf (365 kN)Tear-out force
25.6 in (650 mm)Track width
2020Introduced
Useful excavator charts
Charts appear only when enough usable specifications are available.
Digging geometry
Dig depth
35.3 ft
Reach
51.6 ft
Model spec snapshot
Main numeric specifications for this excavator.
207,235 lbWeight
543 hpPower
4.84 yd³Bucket
82,055 lbfTear-out
How the Caterpillar 395 compares
Comparison is against Caterpillar crawler excavators in the same broad operating-weight class where enough comparable data exists.
Engine power
543 hp
10% above avg
91st percentile
Bucket capacity
4.84 yd³
24% below avg
25th percentile
Digging depth
35.3 ft
37% above avg
83rd percentile
Horizontal reach
51.6 ft
10% above avg
75th percentile
Engine power543 hp
Low 410 hpAverage 496 hpHigh 543 hp
About 10% above the peer average.
Bucket capacity4.84 yd³
Low 3.18 yd³Average 6.38 yd³High 12.07 yd³
About 24% below the peer average.
Digging depth35.3 ft
Low 10.8 ftAverage 25.8 ftHigh 35.3 ft
About 37% above the peer average.
Horizontal reach51.6 ft
Low 34.8 ftAverage 46.7 ftHigh 68.2 ft
About 10% above the peer average.
Tear-out force82,055 lbf
Low 76,930 lbfAverage 83,292 lbfHigh 95,004 lbf
In line with the peer average.
This model Peer average
Crawler excavator information
Manufacturer
Caterpillar
Model
395
Introduced
2020
Undercarriage
SL
Boom
MB
Operating specifications
Operating weight
207,235 lb (94 t)
Bucket capacity
4.84 yd³ (3.7 m³)
Bucket width
3.6 ft (1.1 m)
Maximum digging depth
35.3 ft (10.75 m)
Maximum horizontal reach
51.6 ft (15.73 m)
Tear-out force
82,055 lbf (365 kN)
Engine and emissions
Engine manufacturer
Caterpillar
Engine model
C18 Acert
Engine power
543 hp (405 kW)
Displacement
1,105 cu in (18.1 L)
Cylinder bore × stroke
5.71 × 7.2 in (145 × 183 mm)
Emission level
EU V
Diesel particulate filter
No
Dimensions and transport
Track width
25.6 in (650 mm)
Equipment and features
Air conditioning
Yes
Track adjustment
Yes
Disclaimer: Specifications can vary by configuration, market and attachment. Verify critical dimensions, capacities and ratings against the official machine documentation and the Caterpillar USA website.
