The Caterpillar 390D L crawler excavator was introduced in 2011, with an operating weight of 197,314 lb (89.5 t), engine output of 523 hp (390 kW) and a bucket capacity of 6.02 yd³ (4.6 m³). Maximum horizontal reach is 40.3 ft (12.28 m) and it uses the C18 Acert engine.
Charts appear only when enough usable specifications are available.
Model spec snapshot
Main numeric specifications for this excavator.
197,314 lbWeight
523 hpPower
6.02 yd³Bucket
How the Caterpillar 390D L compares
Comparison is against Caterpillar crawler excavators in the same broad operating-weight class where enough comparable data exists.
Engine power
523 hp
6% above avg
68th percentile
Bucket capacity
6.02 yd³
6% below avg
55th percentile
Horizontal reach
40.3 ft
14% below avg
31st percentile
Engine power523 hp
Low 410 hpAverage 496 hpHigh 543 hp
About 6% above the peer average.
Bucket capacity6.02 yd³
Low 3.18 yd³Average 6.38 yd³High 12.07 yd³
About 6% below the peer average.
Horizontal reach40.3 ft
Low 34.8 ftAverage 46.7 ftHigh 68.2 ft
About 14% below the peer average.
This model Peer average
Crawler excavator information
Manufacturer
Caterpillar
Model
390D L
Introduced
2011
Boom
MB
Operating specifications
Operating weight
197,314 lb (89.5 t)
Bucket capacity
6.02 yd³ (4.6 m³)
Bucket width
6.6 ft (2 m)
Maximum horizontal reach
40.3 ft (12.28 m)
Engine and emissions
Engine manufacturer
Caterpillar
Engine model
C18 Acert
Engine power
523 hp (390 kW)
Displacement
1,105 cu in (18.1 L)
Cylinder bore × stroke
5.71 × 7.2 in (145 × 183 mm)
Emission level
Tier 3
Diesel particulate filter
No
Dimensions and transport
Track width
29.5 in (750 mm)
Equipment and features
Air conditioning
Yes
Disclaimer: Specifications can vary by configuration, market and attachment. Verify critical dimensions, capacities and ratings against the official machine documentation and the Caterpillar USA website.
