The Caterpillar 349F L XE crawler excavator was introduced in 2017, with an operating weight of 108,269 lb (49.1 t), engine output of 425 hp (317 kW) and a bucket capacity of 4.05 yd³ (3.1 m³). Maximum digging depth is 26.9 ft (8.21 m), maximum horizontal reach is 39.9 ft (12.15 m) and it uses the C13 Acert engine.
Caterpillar Crawler Excavator Specifications
Crawler Excavator • Introduced 2017 • C13 Acert
Weight: 108,269 lb (49.1 t)Power: 425 hp (317 kW)Bucket: 4.05 yd³ (3.1 m³)Dig depth: 26.9 ft (8.21 m)
Key specifications
108,269 lb (49.1 t)Operating weight
425 hp (317 kW)Engine power
4.05 yd³ (3.1 m³)Bucket capacity
26.9 ft (8.21 m)Digging depth
39.9 ft (12.15 m)Horizontal reach
60,249 lbf (268 kN)Tear-out force
23.6 in (600 mm)Track width
2017Introduced
Useful excavator charts
Charts appear only when enough usable specifications are available.
Digging geometry
Dig depth
26.9 ft
Reach
39.9 ft
Transport dimensions
Length
39.1 ft
Width
11 ft
Height
12 ft
Model spec snapshot
Main numeric specifications for this excavator.
108,269 lbWeight
425 hpPower
4.05 yd³Bucket
60,249 lbfTear-out
How the Caterpillar 349F L XE compares
Comparison is against Caterpillar crawler excavators in the same broad operating-weight class where enough comparable data exists.
Engine power
425 hp
49% above avg
96th percentile
Bucket capacity
4.05 yd³
55% above avg
97th percentile
Digging depth
26.9 ft
5% above avg
81st percentile
Horizontal reach
39.9 ft
In line with avg
70th percentile
Engine power425 hp
Low 169 hpAverage 284 hpHigh 425 hp
About 49% above the peer average.
Bucket capacity4.05 yd³
Low 1.22 yd³Average 2.62 yd³High 4.05 yd³
About 55% above the peer average.
Digging depth26.9 ft
Low 19.3 ftAverage 25.6 ftHigh 42.8 ft
About 5% above the peer average.
Horizontal reach39.9 ft
Low 33.8 ftAverage 39.9 ftHigh 59.3 ft
In line with the peer average.
Tear-out force60,249 lbf
Low 29,162 lbfAverage 46,154 lbfHigh 62,821 lbf
About 31% above the peer average.
This model Peer average
Crawler excavator information
Manufacturer
Caterpillar
Model
349F L XE
Introduced
2017
Undercarriage
LC
Boom
MB
Operating specifications
Operating weight
108,269 lb (49.1 t)
Bucket capacity
4.05 yd³ (3.1 m³)
Maximum digging depth
26.9 ft (8.21 m)
Maximum horizontal reach
39.9 ft (12.15 m)
Tear-out force
60,249 lbf (268 kN)
Engine and emissions
Engine manufacturer
Caterpillar
Engine model
C13 Acert
Engine power
425 hp (317 kW)
Displacement
763 cu in (12.5 L)
Cylinder bore × stroke
5.12 × 6.18 in (130 × 157 mm)
Emission level
IV
Diesel particulate filter
No
Dimensions and transport
Transport length
39.1 ft (11.93 m)
Transport width
11 ft (3.34 m)
Transport height
12 ft (3.67 m)
Track width
23.6 in (600 mm)
Disclaimer: Specifications can vary by configuration, market and attachment. Verify critical dimensions, capacities and ratings against the official machine documentation and the Caterpillar USA website.
