The Caterpillar 349F L crawler excavator was introduced in 2017, with an operating weight of 107,145 lb (48.6 t), engine output of 417 hp (311 kW) and a bucket capacity of 4.05 yd³ (3.1 m³). Maximum digging depth is 25.1 ft (7.66 m), maximum horizontal reach is 38.5 ft (11.73 m) and it uses the C13 Acert engine.
Caterpillar Crawler Excavator Specifications
Crawler Excavator • Introduced 2017 • C13 Acert
Weight: 107,145 lb (48.6 t)Power: 417 hp (311 kW)Bucket: 4.05 yd³ (3.1 m³)Dig depth: 25.1 ft (7.66 m)
Key specifications
107,145 lb (48.6 t)Operating weight
417 hp (311 kW)Engine power
4.05 yd³ (3.1 m³)Bucket capacity
25.1 ft (7.66 m)Digging depth
38.5 ft (11.73 m)Horizontal reach
60,024 lbf (267 kN)Tear-out force
23.6 in (600 mm)Track width
2017Introduced
Useful excavator charts
Charts appear only when enough usable specifications are available.
Digging geometry
Dig depth
25.1 ft
Reach
38.5 ft
Transport dimensions
Length
41 ft
Width
11 ft
Height
12.2 ft
Model spec snapshot
Main numeric specifications for this excavator.
107,145 lbWeight
417 hpPower
4.05 yd³Bucket
60,024 lbfTear-out
How the Caterpillar 349F L compares
Comparison is against Caterpillar crawler excavators in the same broad operating-weight class where enough comparable data exists.
Engine power
417 hp
47% above avg
93rd percentile
Bucket capacity
4.05 yd³
55% above avg
97th percentile
Digging depth
25.1 ft
In line with avg
61st percentile
Horizontal reach
38.5 ft
3% below avg
60th percentile
Engine power417 hp
Low 169 hpAverage 284 hpHigh 425 hp
About 47% above the peer average.
Bucket capacity4.05 yd³
Low 1.22 yd³Average 2.62 yd³High 4.05 yd³
About 55% above the peer average.
Digging depth25.1 ft
Low 19.3 ftAverage 25.6 ftHigh 42.8 ft
In line with the peer average.
Horizontal reach38.5 ft
Low 33.8 ftAverage 39.9 ftHigh 59.3 ft
About 3% below the peer average.
Tear-out force60,024 lbf
Low 29,162 lbfAverage 46,154 lbfHigh 62,821 lbf
About 30% above the peer average.
This model Peer average
Crawler excavator information
Manufacturer
Caterpillar
Model
349F L
Introduced
2017
Undercarriage
LC
Boom
MB
Operating specifications
Operating weight
107,145 lb (48.6 t)
Bucket capacity
4.05 yd³ (3.1 m³)
Maximum digging depth
25.1 ft (7.66 m)
Maximum horizontal reach
38.5 ft (11.73 m)
Tear-out force
60,024 lbf (267 kN)
Engine and emissions
Engine manufacturer
Caterpillar
Engine model
C13 Acert
Engine power
417 hp (311 kW)
Displacement
763 cu in (12.5 L)
Cylinder bore × stroke
5.12 × 6.18 in (130 × 157 mm)
Emission level
U.S. EPA Tier 4 Final / EU Stage IV
Diesel particulate filter
No
Dimensions and transport
Transport length
41 ft (12.5 m)
Transport width
11 ft (3.34 m)
Transport height
12.2 ft (3.71 m)
Track width
23.6 in (600 mm)
Disclaimer: Specifications can vary by configuration, market and attachment. Verify critical dimensions, capacities and ratings against the official machine documentation and the Caterpillar USA website.
