The Caterpillar 330D2 (Tier 2) crawler excavator was introduced in 2017, with an operating weight of 63,890 lb (29 t), engine output of 211 hp (157 kW) and a bucket capacity of 2.01 yd³ (1.54 m³). Maximum digging depth is 23.9 ft (7.29 m), maximum horizontal reach is 35.2 ft (10.72 m) and it uses the C7.1 Acert engine.
Caterpillar Crawler Excavator Specifications
Crawler Excavator • Introduced 2017 • C7.1 Acert
Weight: 63,890 lb (29 t)Power: 211 hp (157 kW)Bucket: 2.01 yd³ (1.54 m³)Dig depth: 23.9 ft (7.29 m)
Key specifications
63,890 lb (29 t)Operating weight
211 hp (157 kW)Engine power
2.01 yd³ (1.54 m³)Bucket capacity
23.9 ft (7.29 m)Digging depth
35.2 ft (10.72 m)Horizontal reach
40,241 lbf (179 kN)Tear-out force
23.6 in (600 mm)Track width
2017Introduced
Useful excavator charts
Charts appear only when enough usable specifications are available.
Digging geometry
Dig depth
23.9 ft
Reach
35.2 ft
Transport dimensions
Length
34 ft
Width
10.5 ft
Height
10.9 ft
Model spec snapshot
Main numeric specifications for this excavator.
63,890 lbWeight
211 hpPower
2.01 yd³Bucket
40,241 lbfTear-out
How the Caterpillar 330D2 (Tier 2) compares
Comparison is against Caterpillar crawler excavators in the same broad operating-weight class where enough comparable data exists.
Engine power
211 hp
33% above avg
98th percentile
Bucket capacity
2.01 yd³
27% above avg
86th percentile
Digging depth
23.9 ft
11% above avg
92nd percentile
Horizontal reach
35.2 ft
9% above avg
92nd percentile
Engine power211 hp
Low 114 hpAverage 158 hpHigh 208 hp
About 33% above the peer average.
Bucket capacity2.01 yd³
Low 0.78 yd³Average 1.59 yd³High 2.11 yd³
About 27% above the peer average.
Digging depth23.9 ft
Low 19.4 ftAverage 21.5 ftHigh 25.6 ft
About 11% above the peer average.
Horizontal reach35.2 ft
Low 30.3 ftAverage 32.3 ftHigh 36.6 ft
About 9% above the peer average.
Tear-out force40,241 lbf
Low 22,256 lbfAverage 30,702 lbfHigh 45,861 lbf
About 31% above the peer average.
This model Peer average
Crawler excavator information
Manufacturer
Caterpillar
Model
330D2 (Tier 2)
Introduced
2017
Model series
2
Undercarriage
LC
Boom
MB
Operating specifications
Operating weight
63,890 lb (29 t)
Bucket capacity
2.01 yd³ (1.54 m³)
Bucket width
4.6 ft (1.4 m)
Maximum digging depth
23.9 ft (7.29 m)
Maximum horizontal reach
35.2 ft (10.72 m)
Tear-out force
40,241 lbf (179 kN)
Engine and emissions
Engine manufacturer
Caterpillar
Engine model
C7.1 Acert
Engine power
211 hp (157 kW)
Displacement
427 cu in (7 L)
Cylinder bore × stroke
4.13 × 5.31 in (105 × 135 mm)
Maximum torque
664 lb-ft (900 Nm)
RPM at maximum torque
1400 rpm
Emission level
Tier 2 / EU II
Diesel particulate filter
No
Dimensions and transport
Transport length
34 ft (10.36 m)
Transport width
10.5 ft (3.19 m)
Transport height
10.9 ft (3.33 m)
Track width
23.6 in (600 mm)
Disclaimer: Specifications can vary by configuration, market and attachment. Verify critical dimensions, capacities and ratings against the official machine documentation and the Caterpillar USA website.
