Case IH JX1095N Specifications

The Case IH JX1095N specifications include engine power rated at 91 hp (67.9 kW), a 16 forward and reverse transmission and a listed weight of 5,820 to 6,107 lbs.

Case IH JX1095N key specifications

Engine power 91 hp (67.9 kW)
PTO power 80 hp (59.7 kW)
Displacement 238 cu in (3.9 L)
Transmission 16 forward and reverse
Fuel capacity 15 gal (56.8 L)
Weight 5,820 to 6,107 lbs
Wheelbase 85.6 inches (217 cm)

Case IH JX1095N industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power91 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power80 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement3.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity15 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight6,107 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase85.6 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average

Case IH JX1095N power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power91 hp
PTO power80 hp

Case IH JX1095N dimensions chart

Compare the main listed tractor dimensions using centimetres.

Length401 cm
Wheelbase217 cm
Width135 cm
Cab height230 cm
ROPS height232 cm
Ground clearance26 cm

Engine specifications

Bore/Stroke 4.094 × 4.528 inches (104 × 115 mm)
Rated RPM 2,300
Torque 264 lb-ft (358.0 Nm)
Torque RPM 1,400
Fuel system mechanical direct injection
Starter volts 12
Emissions Tier II

PTO and hitch

Rear hitch category Category II
Hitch control mechanical lower-link draft sensing
Rear lift 3,962 lbs (1,797 kg)
Rear PTO independent
Rear PTO speed 540 or 1,000 rpm

Hydraulics

Hydraulic type open center
Hydraulic pressure 2,610 psi (180.0 bar)
Rear valves 2
Pump flow 16.9 gpm (64.0 L/min)
Total flow 23.4 gpm (88.6 L/min)
Steering flow 6.5 gpm (24.6 L/min)

Mechanical specifications

Clutch mechanical dry disc
Differential lock electro-hydraulic rear

Electrical specifications

Electrical ground negative
Charging system alternator
Charging amps 65
Battery CCA 800
Battery volts 12

Dimensions and weight

Length 158 inches (401 cm)
Width 53.4 inches (135 cm, minimum)
Ground clearance 10.5 inches (26 cm)
ROPS weight 5,820 lbs (2,639 kg)
ROPS height 91.6 inches (232 cm)
Cab weight 6,107 lbs (2,770 kg)
Cab height 90.7 inches (230 cm)
Maximum front axle load 4,409 lbs (1,999 kg)
Maximum rear axle load 6,614 lbs (3,000 kg)
Hood height 51 inches (129 cm)

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.