The Case IH Farmall 50A specifications include engine power rated at 50 hp (37.3 kW), a mechanical shuttle transmission and a listed weight of 4,442 to 5,060 lbs.
Case IH Farmall 50A key specifications
Engine power
50 hp (37.3 kW)
PTO power
46 hp (34.3 kW)
Displacement
135.9 cu in (2.2 L)
Transmission
mechanical shuttle
Fuel capacity
13 gal (49.2 L)
Weight
4,442 to 5,060 lbs
Rear PTO
independent
Case IH Farmall 50A industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power50 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power46 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement2.2 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity13 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight5,060 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average
Case IH Farmall 50A power chart
Compare the available engine, PTO and drawbar power ratings.
Engine power50 hp
PTO power46 hp
Tested PTO power46.4 hp
Engine specifications
Bore/Stroke
3.70 × 4.21 inches (94 × 107 mm)
Rated RPM
2,600
Compression
17.5:1
Fuel system
electronic high-pressure common rail
Air cleaner
dry
Pre-heating
glow plugs
Starter
electric
Starter volts
12
Emissions
Tier IV
Transmission options
Gears
8 forward and reverse
Clutch
279 mm mechanical dry disc
PTO and hitch
PTO (tested)
46.39 hp (34.6 kW)
Rear hitch category
Category II
Rear lift (at 24"/610mm)
2,701 lbs (1,225 kg)
Rear PTO speed
540 rpm, 1.375-inch shaft
PTO engine speed
540 PTO rpm at 2,575 engine rpm
Hydraulics
Hydraulic type
open center
Rear valves
1 or 2
Mid valves
0 or 2
Pump flow
11.9 gpm (45.0 L/min)
Steering flow
5.5 gpm (20.8 L/min)
Mechanical specifications
Final drives
planetary
Differential lock
mechanical rear
Electrical specifications
Electrical ground
negative
Charging system
alternator
Charging amps
75
Battery volts
12
Dimensions and weight
Width
67.5 inches (171 cm)
Flange rear axle
53.9 inches (1,369 mm)
Tires and tread
Rear tread
52.6 to 68.4 inches (133 to 173 cm)
2WD Standard tires (ag)
Front: 7.5-16. Rear: 13.6-28
Industrial front tire
12.5-18
Industrial rear tire
18.4-24
Attachments
Bucket width
73 inches (185 cm)
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
