The Case IH 7230 specifications include PTO power rated at 170 hp (126.8 kW), transmission options including full power shift or creeper and a listed weight of 15,750 to 17,790 lbs.
Case IH 7230 key specifications
| PTO power | 170 hp (126.8 kW) |
|---|---|
| Displacement | 504.5 cu in (8.3 L) |
| Transmission | full power shift or creeper |
| Fuel capacity | 95 gal (359.6 L) |
| Weight | 15,750 to 17,790 lbs |
| Wheelbase | 118.3 inches (300 cm) |
| Rear PTO | independent |
Case IH 7230 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
PTO power170 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity95 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight17,790 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase118.3 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 7230 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH 7230 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Engine specifications
| Bore/Stroke | 4.488 × 5.315 inches (114 × 135 mm) |
|---|---|
| Rated RPM | 2,200 |
| Compression | 16.5:1 |
| Fuel system | mechanical injection |
| Air cleaner | dual paper elements |
| Pre-heating | block heater (optional) |
| Oil capacity | 22 qt (20.8 L) |
| Coolant capacity | 31 qt (29.3 L) |
| Starter volts | 12 |
Transmission options
| Gear options | 18 forward and 4 reverse or 24 forward and 6 reverse |
|---|
PTO and hitch
| Drawbar (tested) | 155.35 hp (115.8 kW) |
|---|---|
| PTO (tested) | 184.97 hp (137.9 kW) |
| Rear hitch category | Category III/IIIN |
| Hitch control | electronic lower-link draft sensing |
| Rear lift | 10,875 lbs (4,932 kg) |
| Rear PTO speed | 1,000 rpm, 1.75-inch shaft |
Hydraulics
| Hydraulic capacity | 45.5 gal (172.2 L) |
|---|---|
| Hydraulic type | closed center pressure flow compensated (PFC) |
| Hydraulic pressure | 2,300 psi (158.6 bar) |
| Valves | 2 to 4 |
| SCV flow | 22 gpm (83.3 L/min) |
| Total flow | 29 gpm (109.8 L/min) |
Mechanical specifications
| Clutch | electro-hydraulic wet disc |
|---|---|
| Differential lock | electric rear |
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| Charging amps | 110 |
| Charging volts | 12 |
| Batteries | 2 |
| Battery CCA | 950 |
| Battery volts | 12 |
Dimensions and weight
| Operating weight | 17,790 lbs (8,069 kg) |
|---|---|
| Ballasted weight | 21,680 lbs (9,834 kg) |
| 2WD front axle clearance | 22.8 inches (57 cm) |
| 4WD front axle clearance | 17.6 inches (44 cm) |
| Rear axle | 4.0 × 114 inches (101 × 2,895 mm) or 4.0 × 120 inches (101 × 3,048 mm) |
Tires and tread
| Front tire | 14L-16.1 |
|---|---|
| Rear tire | 20.8R38 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
