The Case IH 7120 specifications include PTO power rated at 150 hp (111.9 kW), transmission options including full power shift or powershift with creeper and a listed weight of 15,920 to 17,220 lbs.
Case IH 7120 key specifications
| PTO power |
150 hp (111.9 kW) |
| Displacement |
504.5 cu in (8.3 L) |
| Transmission |
full power shift or powershift with creeper |
| Fuel capacity |
78 gal (295.2 L) |
| Weight |
15,920 to 17,220 lbs |
| Wheelbase |
118.3 inches (300 cm) |
| Rear PTO |
independent |
Case IH 7120 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
PTO power150 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity78 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight17,220 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase118.3 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 7120 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power135.6 hp
Case IH 7120 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity295.2 L
Hydraulic capacity191.1 L
Case IH 7120 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Power and performance
| Original price |
$76,000 in 1993 |
Engine specifications
| Bore/Stroke |
4.488 × 5.315 inches (114 × 135 mm) |
| Rated RPM |
2,200 |
| Compression |
17.3:1 |
| Air cleaner |
dual paper elements |
| Pre-heating |
ether starting aid |
| Oil capacity |
21 qt (19.9 L) |
| Coolant capacity |
30 qt (28.4 L) |
| Starter volts |
12 |
| Cooling system |
viscous fan |
| Oil change |
250 h |
Transmission options
| Gear options |
18 forward and 2 reverse, 24 forward and 3 reverse, or 18 forward and 4 reverse |
| Clutch |
hydraulic wet disc |
PTO and hitch
| Drawbar (tested) |
135.55 hp (101.1 kW) |
| PTO (tested) |
155.38 hp (115.9 kW) |
| Rear hitch category |
Category III/IIIN |
| Hitch control |
electronic lower link |
| Rear lift (at 24"/610mm) |
8,300 lbs (3,764 kg) |
| Rear PTO speed |
1,000 rpm, 1.375-inch shaft |
| PTO engine speed |
1,000 PTO rpm at 2,200 engine rpm |
Hydraulics
| Hydraulic capacity |
50.5 gal (191.1 L) |
| Hydraulic type |
closed center pressure flow compensated (PFC) |
| Hydraulic pressure |
2,600 psi (179.3 bar) |
| Valves |
2 to 4 |
| Pump flow |
22 gpm (83.3 L/min) |
| Total flow |
29 gpm (109.8 L/min) |
Mechanical specifications
| Drive |
4×2 2WD |
| Steering |
hydrostatic power |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
110 |
| Batteries |
2 |
| Battery CCA |
950 |
| Battery volts |
12 |
Dimensions and weight
| Length |
191 inches (485 cm, 2WD) |
| Shipping weight |
15,920 lbs (7,221 kg, 2WD) |
| Operating weight |
16,605 lbs (7,532 kg, 4WD) |
| Ballasted weight |
19,565 lbs (8,874 kg) |
| Cab height |
118.2 inches (300 cm, 2WD) |
| Front axle clearance |
22.4 inches (56 cm, 2WD) |
| Drawbar clearance |
14.7 inches (37 cm) |
| Rear axle |
4 × 112 inches (101 × 2,844 mm) or 4 × 96 inches (101 × 2,438 mm) |
Tires and tread
| Front tread |
60 to 86 inches (152 to 218 cm, 2WD) or 60 to 95 inches (152 to 241 cm, 4WD) |
| Rear tread |
60 to 125 inches (152 to 317 cm) or 60 to 109 inches (152 to 276 cm) |
| Standard tires (ag) |
Front: 11.00-16. Rear: 18.4R38 (2WD) |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
