The Case IH 2394 specifications include engine power rated at 197 hp (146.9 kW), transmission options including three-speed power shift or four-speed power shift and a listed weight of 14,270 to 16,240 lbs.
Case IH 2394 key specifications
| Engine power |
197 hp (146.9 kW) |
| PTO power |
160 hp (119.3 kW) |
| Displacement |
504 cu in (8.3 L) |
| Transmission |
three-speed power shift or four-speed power shift |
| Fuel capacity |
85 gal (321.7 L) |
| Weight |
14,270 to 16,240 lbs |
| Wheelbase |
118 inches (299 cm) |
Case IH 2394 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power197 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power160 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity85 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight16,240 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase118 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 2394 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power137.8 hp
Case IH 2394 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity321.7 L
Hydraulic capacity121.1 L
Case IH 2394 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.625 × 5.00 inches (117 × 127 mm) |
| Rated RPM |
2,100 |
| Oil capacity |
30 qt (28.4 L) |
| Coolant capacity |
44 qt (41.6 L) |
| Starter volts |
12 |
Transmission options
| Gear options |
12 forward and 3 reverse or 24 forward and 3 reverse |
| Clutch |
hydraulic wet disc |
| Oil capacity |
128 qt (121.1 L) |
PTO and hitch
| Drawbar (claimed) |
142 hp (105.9 kW) |
| Drawbar (tested) |
137.78 hp (102.7 kW) |
| PTO (tested) |
162.15 hp (120.9 kW) |
| Rear hitch category |
Category III |
| Rear lift (at 24"/610mm) |
7,750 lbs (3,515 kg) |
| Rear PTO |
independent |
| Rear PTO speed |
1,000 rpm |
Hydraulics
| Hydraulic capacity |
32 gal (121.1 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,250 psi (155.1 bar) |
| Valves |
2 to 4 |
| Pump flow |
27 gpm (102.2 L/min) |
| Steering flow |
8 gpm (30.3 L/min) |
| Steering pressure |
2,000 psi (137.9 bar) |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
72 |
| Battery volts |
12 |
Dimensions and weight
| Width |
96 inches (243 cm) |
| Shipping weight |
14,270 lbs (6,472 kg) |
| Operating weight |
16,240 lbs (7,366 kg) |
| Rear axle bar |
3.875 × 96 inches (98 × 2,438 mm) or 3.875 × 120 inches (98 × 3,048 mm) |
| Maximum permitted weight |
20,500 lbs (9,298 kg) |
Tires and tread
| Rear tread |
60 to 110 inches (152 to 279 cm) or 60 to 132 inches (152 to 335 cm, long axle) |
| Front tire |
11.00-16 or 14L-16 |
| Rear tire |
18.4-38 or 24.5-32 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
