The Case IH Farmall 35A Series II tractor has multiple listed tire configurations, including 25×8.50-14 at the front and 41×14.00-20 at the rear. Use the table to match the tractor’s agricultural, turf, industrial and 2WD/4WD setup.
Case IH Farmall 35A Series II Tire Size Chart
Configuration
Tire size
Lawn/turf front
25×8.50-14
Lawn/turf rear
41×14.00-20
Industrial front
25×8.50-14
Industrial rear
43×16.00-20
Recommended tire pressure
The recommended rear tire pressure for a Case IH Farmall 35A Series II is typically between 12 and 16 psi for 4-ply tires and up to 24 psi for 6-ply tires; depending on use and load.
Before buying replacement tires
Match the complete sidewall size, rim diameter, axle position, 2WD/4WD configuration and tire type before ordering. On driven front axles, changing overall tire diameter can upset the required front-to-rear rolling ratio.
Tire Pressure
Recommended tire pressure: The recommended rear tire pressure for a Case IH Farmall 35A Series II is typically between 12 and 16 psi for 4-ply tires and up to 24 psi for 6-ply tires; depending on use and load.
Pressure warning: Confirm the correct pressure in the official operator’s manual and the tire manufacturer’s load-and-pressure chart before inflation.
Wheelbase and Ground Clearance
Wheelbase
67.5 inches 171 cm
Specification disclaimer
These specifications are provided as a reference and may vary by production year, country, axle, wheel package and previous tire changes. Before purchasing, fitting or inflating tires, confirm the specifications using the Case IH official U.S. website, the official operator’s manual and the markings on the tires currently fitted.
