The Massey Ferguson 5709M tractor primary air filter part number is 7067437M1. The inner safety filter is 4379575M1.
Massey Ferguson 5709M Air Filter Details
Primary air filter part number
7067437M1
Inner safety air filter part number
4379575M1
Outer air filter part number
7068069M1
Air filter dimensions
Length: 10.8 in
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
300 hrs
Light use
600 hrs
These are practical inspection/replacement guide ranges for the utility tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 5709M Extra Air Filter Notes
Engine displacement
4.4 L | 268.5 cu in
Engine horsepower
90 hp | 67.1 kW
Primary filter note
For the Massey Ferguson 5709M, the listed primary air filter part number is 7067437M1. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 7068069M1.
Safety filter note
The listed inner safety air filter is 4379575M1. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Listed dimensions: Length: 10.8 in. Use dimensions as a second check, not as the only buying method.
Filter size note
The listed dimensions point to a mid-size element length at 10.8 in. Use that as a fitment sanity check against the old filter.
Power range note
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Engine airflow note
Displacement and horsepower together explain airflow demand better than either one alone, but the air-cleaner housing still proves fit.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 5709M Air Filter FAQs
Should I order one filter or a full Massey Ferguson 5709M air-filter set?
For a full parts check, separate the service element from the safety element: buy the outer/primary service element first, then buy the inner safety element only if it is dirty, damaged or due. Do not accidentally order 7068069M1 when you meant the safety filter, or 4379575M1 when you meant the outer filter.
What is the safest way to match a Massey Ferguson 5709M air filter?
If the old filter is missing, use 7067437M1 plus the housing measurements as a two-step check. If either the seal or cover depth is wrong, do not run it.
Why can a similar-size filter still be wrong for a Massey Ferguson 5709M?
The listed length helps, but it is incomplete. Do not buy purely from that value unless the old element also matches.
Which Massey Ferguson 5709M air filter element should I service first?
Multiple numbers usually means a staged air cleaner. Replace the loaded outer element first, then inspect the safety element without exposing the clean intake to dust.
What part-number mistake should I avoid on a Massey Ferguson 5709M?
When there are several part numbers, do not search them all in one cart and hope. Label each one as primary, outer or safety before buying.
Does engine power change how I service the Massey Ferguson 5709M air filter?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
How useful is displacement for a Massey Ferguson 5709M air-filter match?
Displacement and horsepower together explain airflow demand better than either one alone, but the air-cleaner housing still proves fit.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
