The Massey Ferguson 5611 tractor primary air filter part number is 7068311M91. The inner safety filter is 1810694M92.
Massey Ferguson 5611 Air Filter Details
Primary air filter part number
7068311M91
Inner safety air filter part number
1810694M92
Outer air filter part number
4379574M1
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
400 hrs
Light use
800 hrs
These are practical inspection/replacement guide ranges for the row-crop tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 5611 Extra Air Filter Notes
Engine displacement
4.4 L | 268.5 cu in
Engine horsepower
110 hp | 82 kW
Primary filter note
For the Massey Ferguson 5611, the listed primary air filter part number is 7068311M91. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 4379574M1.
Safety filter note
The listed inner safety air filter is 1810694M92. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Engine airflow note
If a cross-reference is for a different displacement family, verify it hard before buying. Similar model names can hide different intake setups.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 5611 Air Filter FAQs
Is the Massey Ferguson 5611 air filter a one-part or multi-part service?
For a full parts check, separate the service element from the safety element: buy the outer/primary service element first, then buy the inner safety element only if it is dirty, damaged or due. Do not accidentally order 4379574M1 when you meant the safety filter, or 1810694M92 when you meant the outer filter.
How should I verify the Massey Ferguson 5611 air filter before fitting it?
Do not buy from the title alone. Match 7068311M91 against the removed filter, then check gasket shape, end-cap depth and cover fit before starting the tractor.
Can a similar Massey Ferguson 5611 air-filter number still be wrong?
The primary number format is a Massey-style M-suffix number, while the page also has separate companion numbers. That is exactly where copy-paste ordering mistakes happen.
Is the Massey Ferguson 5611 outer filter the same as the primary filter?
The outer filter is the dirt-catcher; the inner filter is the backup. Service them with different expectations instead of replacing both out of habit.
What symptoms point to air restriction on a Massey Ferguson 5611?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Should I replace the Massey Ferguson 5611 inner safety filter every time?
No. The inner safety element is backup protection, not the part to disturb every time. Leave it seated while the outer element is out so dust cannot fall into the intake.
How useful is displacement for a Massey Ferguson 5611 air-filter match?
If a cross-reference is for a different displacement family, verify it hard before buying. Similar model names can hide different intake setups.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
