The New Holland Workmaster 25S tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 4.6 gpm | 17.4 lpm, hydraulic type is open center, and valves/remotes are listed as 1 Optional.
Hydraulic Flow4.6 gpm | 17.4 lpm
Hydraulic Typeopen center
Valves / Remotes1 Optional
Lift Capacity728 lbs | 330 kg
New Holland Workmaster 25S Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Pump flow
4.6 gpm | 17.4 lpm
Total hydraulic flow
6.7 gpm | 25.4 lpm
Steering flow
2.1 gpm | 7.9 lpm
Hydraulic valves
1 Optional
New Holland Workmaster 25S Hitch, Remote & Lift Specs
Rear hitch type
I
Rear lift at ends
992 lbs | 449 kg
Rear lift at 24 inches
728 lbs | 330 kg
New Holland Workmaster 25S Useful Hydraulic Calculations
Total flow vs pump flow
145.7% of listed pump flow
Steering flow vs pump flow
45.7% of listed pump flow
Rear lift per pump gpm
158.3 lb per gpm
New Holland Workmaster 25S Hydraulic Comparison Charts
Pump flow comparison
This model
4.6 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Rear lift comparison
This model
728 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland Workmaster 25S Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Wet disc brakes
Differential lock
mechanical rear
New Holland Workmaster 25S Hydraulic Capacity FAQ
Why is the New Holland Workmaster 25S hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland Workmaster 25S, but pump flow is 4.6 gpm | 17.4 lpm, system type is open center, and lift is listed as 728 lbs | 330 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland Workmaster 25S hydraulics feel fast or slow?
The useful speed clue is 4.6 gpm | 17.4 lpm pump flow, below the 8 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland Workmaster 25S?
On the New Holland Workmaster 25S, 4.6 gpm | 17.4 lpm pump flow points to slower loader and cylinder movement and 728 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland Workmaster 25S?
For implement matching, the useful checks are 4.6 gpm flow, 728 lb listed lift, 1 Optional remote/valve listing, and I hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland Workmaster 25S rear lift capacity strong?
The listed lift figure is 728 lbs | 330 kg, below the 1,800 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland Workmaster 25S hydraulic remotes enough?
The New Holland Workmaster 25S remote/valve listing is 1 Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland Workmaster 25S hydraulics handle long hydraulic jobs?
The useful heat clues are 4.6 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland Workmaster 25S hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I and listed lift is 728 lbs | 330 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland Workmaster 25S use?
The hydraulic system is listed as open center with 4.6 gpm | 17.4 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland Workmaster 25S hydraulics?
For service planning, the system is listed as open center and flow is listed at 4.6 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
